NAiS ES2023, ES2024, ES2027 Service Manual

ORDER NO. SD0303G32C2

Epilator

ES2023
ES2024
ES2027

SPECIFICATIONS

Power source AC220-240V, 50-60Hz
Power consumption Approx. 6W
Motor voltage 12V DC
Charging time 8 hours
Weight 135g (unit with the big epilation head)

130g (unit with the small epilation head / unit with the shaver head)

Supplied accessories Soft case

Cleaning brush

CONTENTS

Page Page

1 SCHEMATIC DIAGRAM ...................................................2 4 TROUBLESHOOTING GUIDE ...........................................7

2 DISASSEMBLY INSTRUCTIONS ...................................3-4 5 EXPLODED VIEW & REPLACEMENT PARTS LIST ....8-11

3 ASSEMBLY INSTRUCTIONS .........................................5-6

©2003 Matsushita Electric Works, Ltd.
All rights reserved. Unauthorized copying
and distribution is a violation of law.

ES2023/2024/ES2027

2

1 SCHEMATIC DIAGRAM

ES2023/2024/ES2027

3

2 DISASSEMBLY INSTRUCTIONS

2.1 MAIN UNIT

Follow the procedure below to disassemble the main body.

1. Remove the cap and the epilation head.

Loosen two screws on top.

2. Take out the bottom cover with pushing a head release

button.

3. Separate the housing A and housing B with care to

prevent breakage of hooks.

NOTE: Make sure that there are two hooks on both side

of housing A. If open the unit with all one’s strength, it

may damage the hooks.

ES2023/2024/ES2027

4

2.2 SHAVER HEAD（（（（only for ES2027））））

1. Remove the foil frame, inner blade and trimmer driving

bar.

NOTE: Lift the trimmer driving bar up by using

something like a slotted head screwdriver as shown in

figure with care of breakage.

2. Loosen two screws and remove the retaining plate and

dust-proof rubber.

3. Remove the blade-mounting base and take out the

driving head from the blade holder.