Nady Systems P-Cab Speakers PCS-8X Instruction Manual

Features, Instructions
& Technical Data

P-CabTM Speakers

PCS-8X

Two-Way Powered Speakers

Powerful 2-way active speakers with superior performance, state-of-the­art versatile design, unprecedented affordability — perfect for all small
venue applications.

Congratulations!

You have just purchased one of the nest powered speakers on the
market today. The P-Cab™ Series was developing using the expertise
of professional sound engineers and working musicians. You will nd
your new NADY AUDIO P-Cab™ Series powered speaker has superior
performance and greater exibility than any other powered speaker in
its price range.

We recommend that you read this instruction sheet carefully to get the
most out of your new unit. Thanks for selecting Nady Audio and our
PCS-8X as your choice in powered speakers.

FEATURES

• Full-range, two-way powered speaker

• 8” woofer

• 100W peak (50W RMS)

• Durable but lightweight molded polypropylene enclosures
(designed to deect bumps and scrapes)

• Versatile design perfect for small room PA (as FOH and
monitor speakers), and studio recording applications

• Can be mounted upright on a speaker stand or lay on its side
to be used as a oor monitor

WARNINGS

When using this speaker, basic precautions should always be taken, including the following:

• Read all instructions before using the product.

• This product may be capable of producing sound levels that could
cause permanent hearing loss. Do not operate for a long period of
time at a high volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should consult
an audiologist.

• To avoid damage to the drivers, never overload the speaker.

• To avoid the risk of re, do not ever expose the speaker to a source
of naked ames. Also, it should be located away from heat sources
such as radiators, heat vents, or other devices (including ampliers)
that produce heat.

• The product should be positioned so that proper ventilation
is maintained.

• This speaker is designed for indoor use only. Do not expose to weather
or high humidity, rain, etc.

• Care should be taken so that objects do not fall into, and liquids are
not spilled through, the enclosure’s openings. Do not place containers
of liquids on the speaker.

AND SPECIFICATIONS

IMPORTANT SAFETY INSTRUCTIONS

• Wide-angle, short throw, high-frequency dispersion horns
with 1.0” diameter precision compression driver

• Channel and Master Level controls; Treble and Bass EQs

• XLR balanced RCA and ¼” unbalanced inputs; ¼” unbal­anced output

• Frequency Response: 50Hz-17KHz

• Compact sizing for ease of portability: 8.39”x 10.24” x 15.47”

(28x21.3x39.3cm)

• Lightweight: 18.9lbs (8.6 Kg)

• The product should be connected to a power supply only of the type
described in the operating instructions or as marked on the product.
Replace the fuse only with one of the specied type, size, and correct
rating.

• The power supply cord should: (1) be undamaged, (2) never share an
outlet or extension cord with other devices so that the outlet’s or exten­sion cord’s power rating is exceeded, and (3) never be left plugged into
the outlet when not being used for a long period of time.

• Don’t place any heavy appliance or object on the speaker enclosure.

• This product should be serviced by qualied service personnel if:

A. Objects have fallen into, or liquid has been spilled onto the

B. The product has been exposed to rain.
C. The product does not appear to operate normally or exhibits a

D. The product has been dropped, or the enclosure damaged.

• Do not attempt to service this unit. All servicing should be referred to
qualied service personnel.

product.

marked change in performance.

OPERATION

TECHNICAL DATA

(1) POWER ON/OFF SWITCH

(2) AC POWER CORD AND FUSE HOLDER/VOLTAGE SELECTOR

Connects to the AC power cable.
The fuse holder has a triangular marker on each side. The PCS-8X is set to the
operating voltage printed next to this marker (110VAC/60Hz or 220VAC/60Hz),
and voltage can be changed by removing the fuse holder and re-inserting upside
down. Please make sure that your local voltage matches the voltage indicated on
the unit before attempting to operate. Fuses may only be replaced by same type
and rating.

(3) POWER LED INDICATOR

(4) PEAK LED

This LED lights red when the output signal is clipping. If the red LED ashes
repeatedly, you should turn down the volume to avoid audible distortion and
damage to the speaker.

(5) INPUT 1 - Balanced XLR and unbalanced 1/4” inputs.

(6) INPUT 2 - Balanced XLR and unbalanced RCA inputs.

Note: Speakers damaged due to clipping are not covered under warranty.

(7) OUTPUT - 1/4” unbalanced output.

(8) INPUT LEVEL CONTROLS

(9) MASTER VOLUME LEVEL CONTROLS

(10) HIGH (TREBLE) EQ CONTROL

(11) LOW (BASS) EQ

(5)

(6)

(7)

Made in China

(8)

(9)

(10)

(11)

(3)
(4)

(1)

(2)

WARNING Arrowsonfuseholder
above indicate 110V/220V selection

Front View

Back View

Bottom View

15.47”

10.24”

8.39”

ONE YEAR LIMITED WARRANTY

Please save this warranty and your original sales receipt and retain with your owner’s manual for future reference.

Nady Systems, Inc. warrants to the original consumer purchaser that the speaker is free from any defects in material or workmanship for a period of one year from the date of
original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the speaker free of charge, subject to verication of
the defect or malfunction upon return to Nady Systems.

THIS WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS:

1) This system must have been purchased from an authorized Nady dealer and all warranty service must be performed by Nady’s service department. Any service not

performed by Nady will automatically void this warranty.

2) Items not covered: physical damage resulting from improper handling of the speaker in transit from the factory by the shipper (Nady Systems is not responsible for such
damage and all such claims must be made against the shipping company by the consignee.); damage caused by applying amplication power to the speaker in excess of its
rated power (as indicated by burnt speaker or horn coils or other components); damage or defects caused by abuse, neglect, accident, failure to connect or operate the unit
in a way that does not comply with applicable technical or safety regulations, or improper repair, excessive heat or humidity, alteration causing cracks, broken housings or
parts, appearance items; items damaged in shipment to for repair. Warranty is void if Nady serial number has been removed.

SERVICE

FOR YOUR NADY AUDIO PRODUCT

(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at [phone]
or e-mail at [e-mail]

(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased
this product.

NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: [phone] • Fax: [phone] • www.nady.com