Nady Systems DKW3GTP, DKW, DKW3GTD, DKW3GTB, DKW3GTR User Manual

OWNER’S MANUAL

DKW-3 GT

Wireless VHF Instrument System

Contents

Introduction .............................................................................................................................2

System Features ..................................................................................................................... 2

Operation ................................................................................................................................. 3

Specifications ..........................................................................................................................6

Service Information ................................................................................................................. 6

Warranty .................................................................................................................................. 7

Introduction

Thank you for choosing the Nady DKW-3 GT wireless instrument system, we know you
will be very pleased with its performance and features. The Nady DKW-3 GT is is loaded
with top professional operating features and is the best performance and price value
available in VHF wireless systems.

System Features

1

Receiver

All the advantages and •
freedom of wireless operation
without cumbersome cords

Easy to use—simply plug transmitter •
into your guitar and receiver into your
effects or your amplifier

Exceptional audio virtually •
indistinguishable from that of a cord

150+ feet typical operating range— •
up to 300+ feet line-of-sight

High-band VHF (170-216 MHz) operation •
for reliable, interference-free performance

Advanced audio processing circuitry for •
a wide dynamic range (no overloading
for loud inputs or background hiss during
quiet use)

Complete controls and connections for •
professional operation include front panel
power On/Off switch, output volume
control, Power On LED indicator

Back panel •
and DC power input jack for supplied
AC/DC adaptor

Collapsible receiver antenna •
Special added circuitry eliminates •

transmitter On/Off “pop” noise

WGT Bodypack Transmitter

Off/Standby/On switch allows convenient •
audio muting with the transmitter on

Low battery LED indicator flashes •
once for Unit On; lights steady for
low-battery alert

Locking 3.5mm mini-jack provides •
secure connection for removable
instrument cable

Easily accessible input level adjust •
control for optimum sound

/4” audio output jack

2

Operation

4

1 2 7 6

5 3

Receiver

1. Plug the AC/DC adapter (provided) into
the 9VDC INPUT JACK (3) on the back of the
receiver. Then plug the power supply into
an AC outlet. Switch the POWER (1) to the
“On” position. The POWER ON LED (2) will
now light and the receiver is operational.

2. Rotate and extend ANTENNA (4) fully,
angled at 60° position as shown.

1

/4” AUDIO OUTPUT JACK (5) provides

3. The
a fixed, unbalanced MIC level audio output

1

for connection to your mixer with the

1

/4” cord supplied. As when making any

to

/4”

connection, make sure the mixing board’s
volume is at the minimum level before
plugging in the receiver to avoid possible
sound system damage. Use the VOLUME
CONTROLS (6) to adjust the volume.

Note: this output is the sum of the signals received
by both the internal receivers (CH 1 + CH 2).
Use the CH 1 & CH 2 VOLUME CONTROLS (6)
to adjust the individual relative channel volumes.

3