Nady UHF10 Spec Sheet

Page 1
UHF-10 SPECIFICATIONS
Frequency Response
50 Hz - 15 KHz, +/– 3 dB
Dynamic Range
120 dB
Total Harmonic Distortion
< 0.6%
RF Carrier Frequency Range
UHF, choice of single frequencies from 794-820 MHz
Frequency Stability
+/– 0.005% crystal controlled
Modulation
FM (F3E), +/– 20 KHz
Operating Range
250 feet typical–up to 500+ feet line­of-sight
UHF 10 RECEIVER
Reception Mode
DigiTRU Diversity (Dual Antenna)
Squelch
Tone Key (32.768 KHz), External Control
Controls
Power ON/OFF, Volume Control, Squelch (Mute) Adjust
Connectors
DC in, 1/4(6.3 mm) unbalanced phone jack (750 mV/5K Ohm), XLR balanced output (60 mV/600 Ohm)
LED Indicators
Power ON, Diversity A/B, Audio Peak
Unwanted Signal Rejection
60dB image and spurious
Power Requirements
DC 12-15V @ 300 mA, AC/DC adapter included
Dimensions
16x 9.4x 1.73 (41.0 x 24.0 x 4.4 cm)
Weight
1.15 lb (0.52 Kg)
UHF 10 TRANSMITTERS
Audio Inputs
UB-10 Bodypack: 3.5mm
locking mini-jack 3-way select switch for inputs: instrument, headworn mic, or lavalier mic UH-10 Handheld: Integral Nady DM-10D neodymium dynamic cartridge
Controls
UB-10: OFF/STANDBY/ON,
INSTRUMENT/HEADWORN MIC/LAV MIC, INPUT LEVEL
UH-10: OFF/STANDBY/ON
LED Indicator
Unit ON (single flash), Low Battery Alert (steady)
RF Power Out
50mW nominal (maximum allowed by FCC)
Harmonic & Spurious Emissions
< –50 dB
Battery
9V Alkaline
Battery Life
8-10 Hours (35mA draw typical)
Dimensions
UB-10: 4.2 x 2.5x .88
(10.7 x 6.4 x 2.2 cm) UH-10: 9.5x 1.37 (24.1 x 3.48cm)
Weight UB-10: 3 oz (84g) UH-10: 7.5 oz (210g)
Loading...