Nady QH-50NC User manual
90 DAYS WARRANTY
Nady Systems, Inc. warrants to the original consumer purchaser that your unit is free from
any defects in material or workmanship for a period of 90 days from the date of purchase. If
any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or
replace the unit free of charge, subject to verification of the defect or malfunction upon
delivery or shipping prepaid to Nady Systems.
Important:
Please do not return our product to the store where it was purchased. Nady Systems, Inc.
accepts the responsibility of keeping you a satisfied customer. This warranty does not apply
to defects or physical damage resulting from abuse, neglect, accident, improper repair,
alteration, or unreasonable use of the unit resulting in cracked or broken cases or parts, or
units damaged by excessive heat, and does not apply to batteries or damage caused by
leaking batteries. This warranty does not cover finish or appearance items nor items damaged in shipment en route to Nady Systems Inc. for repair. You must include proof of date
and place of purchase (i.e. photocopy of your bill of sale) or we cannot be responsible for
repairs or replacement. If factory service is required, you must contact our Service
Department at 510/652-2411 for a return authorization (RA) number. Make sure the RA
number is clearly marked on the outside of the package. Nady Systems, Inc. will not repair
nor be held responsible for any units sent without proper identification and return address or
RA number clearly marked on the package. For service, ship units prepaid to: Nady
Systems, Inc., Service Department, 6701 Shellmound St., Emeryville, CA 94608.
Any applicable implied warranties including warranties of merchantability and fitness are
hereby limited to 90 days from date of purchase. Consequential or incidental damages
resulting from a breach of any applicable express or implied warranties are hereby excluded. This warranty is in lieu of all other agreements and warranties, general or special,
express or implied and no representative or person is authorized to assume for us any other
liability in connection with the sale or use of this Nady System's product. Some states do
not allow limitations on how long implied warranties last and do not allow exclusion of incidental or consequential damages so the above limitations and exclusions may not apply to
you. This warranty gives you specific legal rights and you may also have other rights which
may vary from state to state.
U S E R G U I D E
RacketBlaster™ QH-50NC
Noise Canceling Stereo Headphones
INTRODUCTION
Congratulations! You’ve purchased one of the finest
noise-canceling headphones available. Its innovative
technology eliminates unwanted outside noise and
enables your private listening pleasure even in noisy
environments. Please read this user guide carefully to
ensure the best performance of your headphones.
FEATURES
• State-of-the-art noise canceling circuit design eliminates virtually all background ambient noise for total
quiet listening enjoyment
• Large 50mm drivers for unsurpassed audio — rich, powerful, with full frequency
response and punchy bass
• Full-size padded leatherette ear cups and headband for ultimate long-lasting
wearing comfort
• Adjustable headband for comfortable fit with all head sizes
• Separate battery compartment on cable for convenience — uses single AAA
battery
• Operates as standard passive headphones when noise canceling circuitry is
inactivated
USING YOUR HEADPHONES
1. Your headphones are supplied with an in-line battery compartment on the
cable. Grasping the housing firmly with your hands remove the battery door by
sliding it open as indicated by the arrow on the cover. Insert a fresh alkaline
AAA battery.
2. The headphones are provided with a 3.5mm stereo mini plug for the signal
input and can be used with a variety of AV equipment as supplied: CD, DVD, or
MP3/4 players, personal or laptop computers, or home stereo systems. It can
also be used for most airline audio with the optional dual plug adapter (not supplied). Some audio sources with a 1/4” jack, such as professional audio mixers,
require the use of an optional readily available 1/4”— 3.5mm mini stereo plug
adapter. After you have confirmed plug/jack compatibility, connect the headphones to the equipment to which you will be listening.
3. Adjust the headband by pulling up or down on each end so it rests gently on
top of your head and the ear cup cushions fit comfortably around your ears.
Always wear the headphones with the cable on the left to ensure proper L/R
stereo sound.
4. Turn on the power for the noise canceling circuitry with the sliding ON/OFF
switch on the in-line battery compartment housing on the headphones cable.
The red LED will light whenever power is ON and you should then hear that the
ambient noise is reduced. If you're using the headphones in a quiet location
you may not need the noise-canceling feature. In that case, simply leave the
power OFF and use like standard passive headphones.
5. Turn on the power of the equipment to which are connected and you are ready
to enjoy listening noise-free, even if you are in a noisy environment.
6. Always make sure the power is turned off and LED is not lit whenever you are
storing the headphones or not using them.
TROUBLESHOOTING
No sound
• Check the connection of the headphones and the AV equipment to which is
connected
• Check that the connected AV equipment is turned on and the volume is up
Noise Reduction Absent
• Check that the headphones power is turned on (LED lit)
• Replace the battery with a fresh alkaline
SPECIFICATIONS
Driver ..............................................................................................50mm diameter
Frequency Response ..........................................................................20Hz-20KHz
Impedance..................................................................................................32 ohms
Sensitivity ......................................120dB/mW (power on)/ 115dB/mW (power off)
Noise Reduction Level ..............................................................-10dB, 50Hz-1KHz
Power Supply ..............................................................Single AAA alkaline battery
Plug ....................................................................................3.5mm stereo mini-plug
Cord ..............................................................................................50 inches, +/-5%
Typical Battery Life ......................Up to 25 hours (depending on listening volume)
For product improvement purposes, design and specifications are subject to
change at any time without prior notice
Loading...