Nady QH-30NC User manual

90 DAYS WARRANTY

Nady Systems, Inc. warrants to the original consumer purchaser that your unit is free from
any defects in material or workmanship for a period of 90 days from the date of purchase. If
any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or
replace the unit free of charge, subject to verification of the defect or malfunction upon
delivery or shipping prepaid to Nady Systems.

Important:

Please do not return our product to the store where it was purchased. Nady Systems, Inc.
accepts the responsibility of keeping you a satisfied customer. This warranty does not apply
to defects or physical damage resulting from abuse, neglect, accident, improper repair,
alteration, or unreasonable use of the unit resulting in cracked or broken cases or parts, or
units damaged by excessive heat, and does not apply to batteries or damage caused by
leaking batteries. This warranty does not cover finish or appearance items nor items dam­aged in shipment en route to Nady Systems Inc. for repair. You must include proof of date
and place of purchase (i.e. photocopy of your bill of sale) or we cannot be responsible for
repairs or replacement. If factory service is required, you must contact our Service
Department at 510/652-2411 for a return authorization (RA) number. Make sure the RA
number is clearly marked on the outside of the package. Nady Systems, Inc. will not repair
nor be held responsible for any units sent without proper identification and return address or
RA number clearly marked on the package. For service, ship units prepaid to: Nady

Systems, Inc., Service Department, 6701 Shellmound St., Emeryville, CA 94608.

Any applicable implied warranties including warranties of merchantability and fitness are
hereby limited to 90 days from date of purchase. Consequential or incidental damages
resulting from a breach of any applicable express or implied warranties are hereby exclud­ed. This warranty is in lieu of all other agreements and warranties, general or special,
express or implied and no representative or person is authorized to assume for us any other
liability in connection with the sale or use of this Nady System's product. Some states do
not allow limitations on how long implied warranties last and do not allow exclusion of inci­dental or consequential damages so the above limitations and exclusions may not apply to
you. This warranty gives you specific legal rights and you may also have other rights which
may vary from state to state.

U S E R G U I D E

RacketBlaster™ QH-30NC

Noise Canceling Stereo Headphones

INTRODUCTION

Congratulations! You’ve purchased one of the finest noise­canceling headphones available. Its innovative technology
eliminates unwanted outside noise and enables your private
listening pleasure even in noisy environments. Please read
this user guide carefully to ensure the best performance of
your headphones.

FEATURES

• State-of-the-art noise canceling circuit design eliminates
virtually all background ambient noise for total quiet listening enjoyment

• Large 30mm drivers for unsurpassed audio — rich, powerful, with full frequency
response and punchy bass

• Compact folding design and leatherette pouch for easy transport while travel­ing—perfect for private listening without distracting ambient noise in airplanes
and other noisy environments

• Full-size padded leatherette ear cups and adjustable headband for ultimate long­lasting wearing comfort and fit for all head sizes

• Uses single AAA battery (included)

• 3.5mm stereo mini-plug — 2-prong airline jack adapter included

• Operates as standard passive headphones when noise canceling circuitry is
inactivated

USING YOUR HEADPHONES

1. Your headphones are supplied with an in-line battery compartment on the right
headband. Grasping the headphone firmly with your hands and slide the bat­tery door as indicated by the arrow on the cover. Flip open the hinged door and
insert a single fresh alkaline AAA batter y.

2. The headphones are provided with a 3.5mm stereo mini plug for the signal
input and can be used with a variety of AV equipment as supplied: CD, DVD, or
MP3/4 players, personal or laptop computers, or home stereo systems. It can
also be used for most airline audio with the dual plug adapter supplied. Some
audio sources with a 1/4” jack, such as professional audio mixers, require the
use of an optional readily available 1/4”—3.5mm mini stereo plug adapter. After
you have confirmed plug/jack compatibility, connect the headphones to the
equipment to which you will be listening.

3. Unfold the headphone and adjust the headband by pulling up or down on each
end so it rests gently on top of your head and the ear cup cushions fit comfort­ably around your ears. Always wear the headphones with the battery compart­ment on the right as marked on the headbands to ensure proper L/R stereo
sound.

4. Turn on the power for the noise canceling circuitry with the sliding ON/OFF
switch on the right earcup. The red LED will light whenever power is ON and
you should then hear that the ambient noise is reduced. If you're using the
headphones in a quiet location you may not need the noise-canceling feature.
In that case, simply leave the power OFF and use like standard passive head­phones.

5. Turn on the power of the equipment to which are connected and you are ready
to enjoy listening noise-free, even if you are in a noisy environment.

6. Always make sure the power is turned off and LED is not lit whenever you are
storing the headphones or not using them.

7. Always fold the headphone for storage and transport.

TROUBLESHOOTING

No sound

• Check the connection of the headphones and the AV equipment to which is
connected

• Check that the connected AV equipment is turned on and the volume is up

Noise Reduction Absent

• Check that the headphones power is turned on (LED lit)

• Replace the battery with a fresh alkaline

SPECIFICATIONS

Driver ..............................................................................................30mm diameter

Frequency Response ..........................................................................20Hz-20KHz

Impedance..................................................................................................32 ohms

Maximum Power Output................................................................60mW (P.M.P.O.)

Sensitivity ..................................................................................10dB SPL at 1Khz

Noise Reduction Level ..................................................................-12dB @ 300Hz

Power Supply ..............................................................Single AAA alkaline battery

Plug ..............3.5mm stereo plug (dual prong airline audio plug adapter included)

Length of Cord ..................................................................................5 feet, +/-10%

Typical Battery Life ......................up to 25 hours (depending on listening volume)

For product improvement purposes, design and specifications are subject to change at any
time without prior notice

.