Nady PCS-10X User Manual

Features, Instructions
& Technical Data

P-CabTM Speakers

PCS-10X

Two-Way Powered Speakers

Powerful 2-way active speaker with superior performance, versatile
design, and unprecedented affordability — perfect for all small venue
applications.

Congratulations!

You have just purchased one of the nest powered speakers on the
market today. The P-Cab™ Series was developing using the expertise
of professional sound engineers and working musicians. You will nd
your new Nady Audio P-Cab™ Series powered speaker has superior
performance and greater exibility than any other powered speaker in
its price range.

We recommend that you read this instruction sheet carefully to get the
most out of your new unit. Thanks for selecting Nady Audio and our
PSC-10X as your choice in powered speakers.

FEATURES

• Full-range, two-way powered speaker

• 10” woofer (4ohms)

• 300W peak (150W RMS)

• Durable but lightweight molded polypropylene enclosures
(designed to deect bumps and scrapes)

• Versatile design perfect for small room PA (as FOH and
monitor speakers), and studio recording applications

• Can be mounted upright on a speaker stand

• Can be used as a oor monitor (laid on its side) with supplied
brackets

WARNINGS

When using this speaker, basic precautions should always be taken, including the following:

• Read all instructions before using the product.

• This product may be capable of producing sound levels that could
cause permanent hearing loss. Do not operate for a long period of time
at a high volume level. If you experience any hearing loss or ringing in
the ears, you should consult an audiologist.

• To avoid damage to the drivers, never overload the speaker.

• To avoid the risk of re, do not ever expose the speaker to a source
of naked fames. Also, it should be located away from heat sources
such as radiators, heat vents, or other devices (including ampliers) that
produce heat.

• The product should be positioned so for proper ventilation.

• This speaker is designed for indoor use only. Do not expose to weather
or high humidity, rain, etc.

• Care should be taken so that objects do not fall into the enclosure’s
openings. Do not place containers or liquids on the speaker.

• The product should be connected to a power supply only of the type
described in the operating instructions or as marked on the product.

AND SPECIFICATIONS

IMPORTANT SAFETY INSTRUCTIONS

• Wide-angle, short throw, high-frequency dispersion horns
with 1.0” diameter precision compression driver

• Channel and Master Level controls; Low and High EQs

• XLR balanced and ¼” unbalanced inputs and outputs; RCA
inputs

• Frequency Response: 50Hz-17KHz

• Compact sizing for ease of portability: 8.59”x 10.24” x 18.58”

• Lightweight: 25lbs

Replace the fuse only with one of the specied type, size, and correct
rating.

• The power supply cord should: (1) be undamaged, (2) never share an
outlet or extension cord with other devices so that the outlet’s or exten­sion cord’s power rating is exceeded, and (3) never be left plugged into
the outlet when not being used for a long period of time.

• Don’t place any heavy appliance or object on the speaker enclosure.

• This product should be serviced by qualied service personnel if:

A. Objects have fallen into, or liquid has been spilled onto the

B. The product has been exposed to rain.
C. The product does not appear to operate normally or exhibits a

D. The product has been dropped, or the enclosure damaged.

• Do not attempt to service this unit. All servicing should be referred to
qualied service personnel.

product.

marked change in performance.

OPERATION

TECHNICAL DATA

(1) POWER ON/OFF SWITCH
(2) AC POWER CORD AND FUSE HOLDER/VOLTAGE SELECTOR

Connects to the AC power cable
The fuse holder has a triangular marker. The PCS-10X is set to the operating
voltage printed next to this marker and voltage can be changed by removing the
fuse holder and re-inserting upside down.Please make sure that your local volt­age matches the voltage indicated on the unit, before attempting to operate the
PCS-10X. Fuses may only be replaced by same type and rating.
(3) POWER LED INDICATOR

(4) INPUTS

Balanced XLR and unbalanced 1/4” & RCA inputs.

(5) OUTPUTS

Balanced XLR and 1/4” unbalanced outputs.

(6) PEAK LED INDICATOR

This LED lights red when the output signal is clipping. If the red LED ashes
repeatedly, you should turn down the volume to avoid audible distortion and
damage to the speaker.

Note: Speakers damaged due to clipping are not covered under warranty.

(7) LEVEL CONTROL

This controls the master volume.

(8) HIGH (TREBLE) EQ CONTROL
(9) LOW (BASS) EQ CONTROL
(10) INPUT LEVEL CONTROLS

This controls levels of the individual channels.

(4)

(5)

(10)

(7)

(8)

(9)

(6)

(3)

(2)

Front View

18.58”

Back View

10.24”

Bottom View

1 3/8”

(1)

8.59”

ONE YEAR LIMITED WARRANTY

Please save this warranty and your original sales receipt and retain with your owner’s manual for future reference.
Nady Systems, Inc. warrants to the original consumer purchaser that the speaker is free from any defects in material or workmanship for a period of one year from the date of original retail purchase.
If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the speaker free of charge, subject to verication of the defect or malfunction upon return to Nady
Systems.
This warranty is subject to the following conditions:

1) This system must have been purchased from an authorized Nady dealer and all warranty service must be performed by Nady’s service department. Any service not performed by Nady will automati­cally void this warranty.

2) Items not covered: physical damage resulting from improper handling of the speaker in transit from the factory by the shipper (Nady Systems is not responsible for such damage and all such claims
must be made against the shipping company by the consignee.); damage caused by applying amplication power to the speaker in excess of its rated power (as indicated by burnt speaker or horn
coils or other components); damage or defects caused by abuse, neglect, accident, failure to connect or operate the unit in a way that does not comply with applicable technical or safety regulations, or
improper repair, excessive heat or humidity, alteration causing cracks, broken housings or parts, appearance items; items damaged in shipment to for repair. Warranty is void if Nady serial number has
been removed.

SERVICE

FOR YOUR NADY AUDIO PRODUCT

(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at [phone] or e-mail at
[e-mail]

(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product.

NADY SYSTEMS, INC. • 6701 SHELLMOUND STREE, EMERYVILLE, CA 94608

Tel: [phone] • Fax: [phone] • www.nady.com