Nady PC-80 operating instructions

Congratulations!

You have just purchased one of the finest power controllers on the
market today. The PC-80 was developed using the expertise of
professional sound engineers and working musicians. You will find your
new NADY AUDIO power controller has superior performance and greater flexibility than any other power controllers in its price range.

We recommend that you read this instruction sheet carefully to get the most out of your new unit. Thanks for selecting NADY AUDIO and the PC-80 as
your choice in power controllers.

PC-80

Power Controller

• Convenient 1U rack unit for controlling power ON/OFF for up to 8 connected pieces of audio equipment

• Eight 3-prong AC outlets in rear, each controlled by front panel enabling switch with LED status indicator. Allowing for smooth power up and down of
power amplifiers, mixer consoles, wireless equipment, etc.

• Circuit breaker

WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

FEATURES

1. Read all instructions before using the product.

2. Do not use this product near water (e.g., near a bathtub, washbowl,
kitchen sink, in a wet basement, or near a swimming pool, etc.).

3. This product should be used only with a cart or stand that will keep it
level and stable and prevent wobbling.

4. This product, in combination with headphones or speakers, may be
capable of producing sound levels that could cause permanent hearing
loss. Do not operate for a long period of time at a high volume level or at
a level that is uncomfortable. If you experience any hearing loss or
ringing in the ears, you should consult an audiologist.

5. The product should be positioned so that proper ventilation is
maintained.

6. The product should be located away from heat sources such as
radiators, heat vents, or other devices (including amplifiers) that produce
heat.

7. The product should be connected to a power supply only of the type
described in the operating instructions or as marked on the product.
Replace the fuse only with one of the specified type, size, and correct
rating.

8. The power supply cord should: (1) be undamaged, (2) never share an
outlet or extension cord with other devices so that the outlet’s or
extension cord’s power rating is exceeded, and (3) never be left plugged
into the outlet when not being used for a long period of time.

9. Care should be taken so that objects do not fall into, and liquids are
not spilled through, the enclosure’s openings.

10. The product should be serviced by qualified service personnel if:
A. The power supply cord or the plug has been damaged.
B. Objects have fallen into, or liquid has been spilled onto the
product.
C. The product has been exposed to rain.
D. The product does not appear to operate normally or
exhibits a marked change in performance.
E. The product has been dropped, or the enclosure damaged.

11. Do not attempt to service the product beyond what is described in the

user maintenance instructions. All other servicing should be referred to
qualified service personnel.

When using this electronic device, basic precautions should always be taken, including the following:

USER GUIDE

FRONT & REAR CONTROLS

& CONNECTIONS

(1)

(2)

(4)

(3)

(1) Outlet power switch
(2) 20A circuit breaker

(3) AC power cable for connecting to ground 3-prong AC socket
(4) AC output connectors, 8 each. Compatible with standard US 3-prong

SPECIFICATIONS

For use in US and Canada 120 VAC 60 Hz

Circuit Breaker: 20A
Dimensions: 1.75” x 19” x 4.4” (44 x 482 x 112 mm)
Weight: 3 lbs. (1.36 Kg)

(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at [phone] or e-mail at
[e-mail].

(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product.

SERVICE

FOR YOUR NADY AUDIO PRODUCT

NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: [phone] • Fax: [phone] • www.nady.com