Nady MC-8 User Guide

Congratulations!

You have just purchased one of the finest speakers on the market today. The M-Cab
Series™ was developed using the expertise of professional sound engineers and
working musicians. You will find your new NADY AUDIO speaker has superior
performance and greater flexibility than any other speaker in its price range.

We recommend that you read this instruction sheet carefully to get the most out of
your new unit. Thanks for selecting NADY AUDIO and the MC-8 as your choice in
speakers.

Powerful 2-way speakers perfect for all small venue applications, the M-Cab
Series™ deliver maximum versatility, state-of-the-art cabinet design, and
premium performance and specs with ultra-clean transparent sound.

MC-8

Two-Way Speaker

M-Cab™ Speakers

Features, Instructions
& Technical Data

• Full range, 2-way speaker with 8” woofer, 5.5” x 8” compression horn

• 4Ω impedance

• 150W peak power rating (75W RMS)

• Durable yet lightweight molded high-impact mineral loaded polypropylene
enclosures, designed to deflect bumps and scrapes, and perfectly balanced for
ease of portability and set-up

• Versatile design perfect for myriad small room PA (as FOH and monitor speakers)
and project recording applications (as studio monitors). Can be mounted upright
or wall mounted with mounting bracket included.

• Low impedance compensated crossovers with full driver protection

• Wide-angle, short throw, high-frequency dispersion horns with 1.0" diameter
precision compression driver

• 80 Hz to 20 KHz frequency response

• 90dB ±2 (1W@1M) sensitivity

• (1X) Speakon™ and (2X) 1/4" input jacks

• Lightweight: 14.15 lbs (5.28 Kg)

• Compact sizing for ease of portability: 11" x 9.8"x 16.8" (27.9 x 24.9 x 42.7 cm)

WARNINGS

• Read all instructions before using the product.

• This product may be capable of producing sound levels that could cause
permanent hearing loss. Do not operate for a long period of time at a high
volume level or at a level that is uncomfortable. If you experience any
hearing loss or ringing in the ears, you should consult an audiologist.

• To avoid damage to the drivers, never overload the speaker.

• To avoid the risk of fire, do not ever expose the speaker to a source of
naked flames. Also, it should be located away from heat sources such as
radiators, heat vents, or other devices (including amplifiers) that produce
heat.

• The product should be positioned so that proper ventilation is maintained.

• This speaker is designed for indoor use only. Do not expose to weather or
high humidity, rain, etc.

• Care should be taken so that objects do not fall into, and liquids are not
spilled through, the enclosure’s openings. Do not place containers of liquids
on the speaker.

• Don’t place any heavy appliance or object (>130lbs/60kg) on the speaker
enclosure.

• This unit is to be installed by qualified personnel only.

• This speaker is only to be used with power amplifiers complying with the
safety requirement of EN or IEC60065.

• This product should be serviced by qualified service personnel if:

A. Objects have fallen into, or liquid has been spilled onto the product.
B. The product has been exposed to rain.
C. The product does not appear to operate normally or exhibits

a marked change in performance.

D. The product has been dropped, or the enclosure damaged.

• Do not attempt to service this unit. All servicing should be referred to
qualified service personnel.

IMPORTANT SAFETY INSTRUCTIONS

When using this speaker, basic precautions should always be taken, including the following:

FEATURES

AND SPECIFICATIONS

(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at [phone]
or e-mail at [e-mail].

(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased
this product.

SERVICE

FOR YOUR NADY AUDIO PRODUCT

NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: [phone] • Fax: [phone] • www.nady.com

SPECIFICATIONS

TECHNICAL DATA

IMPEDANCE RESPONSE

Wall mounting

11"

16.8"

9.8"

Front View

Back View

Bottom View

Speakon™ Connection

dB spl Deg

Magnitude PhaseSound Pressure Level

100

90

80

70

60

50

40

30

20

20 100 500 1k Hz 5k 10k 20k

Frequency

180

135

90

45

0

-45

-90

-135

-180