Nady CBM 40 operating instructions

CBM 40

Condenser Boundary Microphone

USER GUIDE

Thanks for purchasing the Nady CBM 40 Boundary
Microphone! This microphone is a wide-range back
electret condenser with a cardioid polar pattern. It
is very useful in a variety of surface-mounted
applications such as high quality sound
reinforcement, professional recording, and many
other demanding sound pickup situations. The
microphone is designed to be powered by an
external 9-52 V DC phantom power supply and is
enclosed in a heavy-duty die cast case on rubber
padding to minimize mechanical coupling of
surface vibrations to the microphone.

UNPACKING, INSPECTION, STORAGE AND TRANSPORT

Your CBM 40 microphone was carefully packed at the factory, and the shipping carton was designed to protect the unit during
shipping. Please examine your microphone before using and retain the external shipping package for reuse should you ever need to
return your microphone for servicing.

•The microphone should never be dropped or subjected to extreme shock. Store only in a padded case to protect it during transport.

•Keep the microphone away from extremely high temperatures (above 140˚F or 60˚C) and humidity. Avoid leaving the microphone in
direct sunlight for long periods of time.

•When using the microphone outdoors, avoid getting it wet.

•After use in a high-moisture application such as a stage performance, wipe off the microphone with a dry cloth and permit it to air dry.
Do not store the unit in a closed space (e.g., a plastic bag) until all moisture has evaporated.

PRECAUTIONS AND CARE OF YOUR CBM 40

USING YOUR CBM 40

The CBM 40 can be used with any standard mixer, powered mixer/amplifier, or mic preamp which provides 9-52V phantom power. The
optional Nady 48V SMPS-1 Phantom Power Supply can also be used if your mixer doesn't supply phantom power. Connect the
supplied mini-XLR to XLR cable directly to your equipment, or use an XLR to XLR balanced low impedance cable as an extension if
needed.

The CBM 40 should be placed on a sturdy flat surface and aimed at the sound source. Experiment with your mic and you will find it to
be a useful tool in many applications. Although designed primarily for high quality far field pickup of audio, such as for use with choirs
and stage plays, the Nady CBM 40 can also be used in many creative applications. For example, wrapped in a blanket to deaden
vibrations, it is a very effective kick drum mic when placed inside the kick drum.

Be aware of the proximity effect (an increase in bass response) when the mic is placed close to the instrument. This may or may not
be desirable. Experimenting with the position of the mic with respect to the audio source will ensure the optimum results you are
seeking in any given application.

If the microphone is placed too near a speaker during live stage use, an unpleasant howling effect (acoustic feedback) may occur.
Although all microphones are prone to feedback to some extent, those with a unidirectional polar pattern (such as the CBM 40) are
specially designed to accept only signals from audio sources in front of the mic element. Thus, the half cardioid pattern of the CBM 40
ensures that it will deliver only the desired audio in front of the mic, rejecting the unwanted audio from the rear, even in noisy ambient
conditions with high sound pressure levels from the P.A. and monitor speakers. This means that feedback will be greatly minimized
with the CBM 40 in all live performance miking applications. Of course, when using this mic in far field audio pickup applications, extra
care must be taken to lessen feedback.

Some useful ways in which to totally eliminate annoying feedback include: experimenting with mic positions with respect to the
speakers, decreasing speaker volume (whenever possible), and adjusting the equalization of the mic audio with the mixer.

Date of purchase ____________________________________________________________________________________________
Dealer’s Name ______________________________________________________________________________________________
Street ______________________________________________________________________________________________________
City ____________________________________State ____________________Zip ______________________________________

SERVICE

(U.S.) Should your Nady microphone require service, please contact the Nady Service Department via telephone at (510) 652- 2411 or
e-mail at [e-mail]. (INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer
from whom you purchased this product.

Note: Do not attempt to service this unit yourself as it will void your warranty.

CBM 40 SPECIFICATIONS

Transducer Type

........................................Back electret condenser element

Directional Pattern ................................Uni-directional (cardioid)

Frequency Response ............................50Hz~18KHz

Sensitivity (@ 1KHz,74dB S.P.L.)..........-45dB, +/-3dB

Impedance ..............................................250Ω, balanced

Maximum S.P.L. (1%T.H.D.)....................>130dB

Connector................................................Mini-XLR

Power Requirements..............................9-52V phantom power

Dimensions ............................................3.5" x 4.5" (8.9 cm x 11.4 cm)

Weight......................................................9.5 oz (271g)

Material....................................................Die-cast metal alloy

Accessories ............................................20’ (X2 mini-XLR) cable, mini-XLR/XLR

phantom power adapter

Specifications and design subject to change for improvement purposes without prior notice.

03/12/03

FREQUENCY RESPONSE

NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608 • Tel: [phone] • Fax: [phone] • www.nady.com

FEATURES

• Ideal for a variety of sound reinforcement/recording
applications; Choirs, orchestras, theatrical performances,
courtrooms/conference rooms, and inside bass/kick drums

• Uni-directional pickup pattern and full frequency response of
50Hz~18KHz produce top audio at any distance from the
source with excellent feedback rejection

• Rugged die-cast alloy housing on rubber padding to minimize
mechanical coupling of surface vibrations to the microphone

• 9-52V phantom powered

4.5"

3.5"

DIMENSIONS

Relative Response in Db

+20

+10

0

-10

0 20HZ 50HZ 100HZ 500HZ 1K 2K 5K 10K 20K