NAD Electronics D 7050 Owner's Manual
®
POWER
ON
100-240V ~ 50/60Hz
COMPONENT VIDEO OUT
AUDIO OUT
L R
HDMI OUT1
HDMI OUT2
12V IN
12V OUT
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
COMPONENT VIDEO OUT
HDMI OUT1
HDMI OUT2
12V IN
12V OUT
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
LAN
USB HEADPHONES MIC
POWER
ON
100-240V ~ 50/60Hz
COMPONENT VIDEO OUT
HDMI OUT1
HDMI OUT2
12V IN
12V OUT
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
AUDIO OUT
+12V
TRIGGER
IN
OPTICAL
COMPUTER
DIGITAL AUDIO INPUT
LAN
100-240V 50/60Hz
SPEAKERS
RIG HT
LEF T
WPS/JBRESET
21
1
2
L
R
AUDIO OUT
+12V
TRIGGER
IN
OPTICAL
COMPUTER
DIGITAL AUDIO INPUT
LAN
100-240V 50/60Hz
SPEAKERS
RIG HT
LEF T
WPS/JBRESET
21
1
2
L
R
AUDIO OUT
+12V
TRIGGER
IN
OPTICAL
COMPUTER
DIGITAL AUDIO INPUT
100-240V 50/60Hz
SPEAKERS
RIG HT
LEF T
21
1
2
L
R
SPEAKERS
RIG HT
LEF T
D 7050 Direct Digital Network Amplier
Quick Setup Guide
WHAT’S IN THE BOX
+
CR2025
Feet x 8
IMPORTANT!
· Download the D 7050 Direct Digital Network Amplier and NAD USB Audio
driver from the Manuals/Downloads tab of the NAD website link:
http://nadelectronics.com/products/digital-music/D-7050-DigitalNetwork-Amplier
· Refer to the section about “FEET INSTALLATION GUIDELINE” in the owner’s
manual for proper feet positioning and placement.
CONNECT!
EXTERNAL SOURCES
External Device
DISPLAY USB USB
NAD USB Audio driver must be
installed to stream computer
audio via D 7050.
External Device
DIGITAL AUDIO OUT
FIREWIREFIREWIRE
OPTICAL
HDMI OUT1
COAXIAL
HDMI OUT2
External Device
12V IN
COMPONENT VIDEO OUT
12V OUT
CONNECT!
SPEAKERS AND POWER UP!
External Speakers
Mains AC Power
AUDIO OUT
+12V
TRIGGER
IN
OPTICAL
COMPUTER
DIGITAL AUDIO INPUT
LAN
100-240V 50/60Hz
SPEAKERS
RIG HT
LEF T
WPS/JBRESET
21
1
2
L
R
AUDIO OUT
+12V
TRIGGER
IN
OPTICAL
COMPUTER
DIGITAL AUDIO INPUT
LAN
100-240V 50/60Hz
SPEAKERS
RIG HT LEF T
WPS/JBRESET
21
1
2
L
R
CONNECT!
AUDIO OUT
+12V
TRIGGER
IN
COMPUTER
DIGITAL AUDIO INPUT
LAN
100-240V 50/60Hz
SPEAKERS
RIG HT
LEF T
WPS/JBRESET
21
1
2
L
R
AUDIO OUT
+12V
TRIGGER
IN
SPEAKERS
RIG HT
LEF T
WPS/JBRESET
L
R
SPEAKERS AND POWER UP!
SETUP NETWORK CONNECTION
SHARE WI-FI SETTINGS
1 Using applicable Apple USB cable (not supplied), connect a Wi-Fi connected iOS device to the USB input of D7050.
2 Press WPS/JB by safely using
the tip of a pointed object.
3 From iOS device, tap “Allow”.
NOTE: Upon successful Wi-Fi sharing, disconnect iOS device from D7050. Refer to the owner’s manual for other methods of network connection.
All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited.
No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.
©2013 NAD ELECTRONICS INTERNATIONAL, A DIVISION OF LENBROOK INDUSTRIES LIMITED
D7050_QS_V06 07/13
Loading...