Owner Instructions
Warning! Read instructions before using the machine
CVC 370
WV 370
WVT 370
WV 380
WV 470
Kit - A21A / Kit AA12
NV
Kit A21A
Kit AA12
CVC 370
WV 370
WV 380
WV 470
CVC 370 - WV 370
WVT 370
WV 380 - WVT 370
604016
NVM 2BH
WV 470
604018
NVM 3AH
Wet - Assembly
3
1 2
1
2
3 4 5
6 7
4
8
Wet - Using your machine
0
I
Dry - Assembly
1 2 3
4 5
2
1
CVC 370
6
WV 370
WV 380
NVM-2BH
604016
WV 470
NVM-3AH
604018
A
Dry - Assembly
B
B
B
0
I
A
Dry - Using your machine
470 Handle Locking Instructions
Fitting the Face on
1
2
CLICK
CLICK
Removing the Face
1
2
CLICK
About your machine
1
Voltage Frequency
2
Power rating
3
Weight (ready to use)
4
Company Name & Address
5
Machine Description
6
Machine yr/wk Serial number
7
WEEE Logo
8
Class 2 Symbol
CE Mark
9
4
5
1
3
2
9
6
PPE (personal protective equipment) That may be required for certain operations.
Ear Protection
Caution Floor Sign
Safety Footwear
Head Protection
NOTE: A risk assessment should be conducted to determine which PPE should be worn.
Safety Gloves
Eye Protection
Protective
Clothing
Safety Critical Components
Mains leads:
HO5-V2V2-F 10 x 2 x 1.00 mm
2
7
8
Dust / Allergens
Protection
Hi Viz Jacket
WEEE Legislation
(Waste, Electrical and Electronic Equipment)
Vacuum cleaner, accessories and packaging should be sorted for
enviromental-Friendly recycling.
(Only for EU Countries)
Do not dispose of vacuum cleaner into household waste! According to
the European Directive 2002 / 96 / EC on waste electrical and electronic
equipment and its incorporation into national law.
Vacuum cleaners that are no longer suitable for use must be separately
collected and sent for recovery in an enviromental-friendly manner.
Failure to rectify the problem or in the event of a breakdown contact your Numatic
dealer or the Numatic Technical helpline +44 (0)1460 269268
Information for Wet & DRY Use Vacuum cleaners
Read the instruction manual before using the machine.
Operators shall be adequately instructed on the use of these machines.
As with all electrical equipment, care and attention must be exercised at all times during use,
in addition to ensuring that routine and preventative maintenance is carried out periodically to
ensure safe operation.
WARNING
in this respect.
The machine shall be disconnected from the mains by removing the plug from the supply socket during cleaning
or maintenance and when replacing parts or converting the machine to another function.
The machine is not to be used by children or persons with reduced physical, sensory or mental capabilities, or
lack of experience or knowledge, unless they have been given supervision or instruction.
Children being supervised are NOT to play with the machine.
This appliance is intended to be assembled, cleaned and maintained by an adult.
This machine is not a toy.
CAUTION
chemical content.
This machine is not suitable for the collection of biological hazards, hazardous or explosive dust. You should
contact your local distributor if you require a machine capable of performing these tasks.
Ensure that the ltration system tted to the machine is suitable for the material being collected.
This machine is for indoor use only.
This machine shall be stored indoors only
This product complies with the requirements IEC 60335 -2.69.
When moving from one place to another, consider the weight of the machine.
NOTES
Failure to carry out maintenance as necessary, including the replacement of parts to the correct
standard could render this equipment unsafe and the manufacturer can accept no responsibility
If foam/liquid comes out of machine exhaust, switch off immediately. Allow the accumulated
liquid to drain out through the machine exhaust, check the oat assembly to ensure correct
operation, empty the container if full of liquid, reassemble the machine. Immediately upon
start up there will be a certain amount of liquid issuing from the machine exhaust which will be
the residue of liquid still within the power head. This will be quickly discharged after which the
machine should function normally.
Liquid ejected from the machine could be hazardous as a result of its temperature, pressure or
This machine is also suitable for commercial use, for example in hotels, schools, hospitals,
factories, shops and ofces for other than normal housekeeping purposes.
• Use a bag and lter at all times when using ‘dry’.
• Keep your machine clean.
• Keep lters clean.
• Regularly clean the water level limiting oat safety valve and examine
for signs of damage or correct operation.
• Keep hoses and tubes clear.
DO
• Regularly examine the power cord, if damage is found, power cord must be replaced by a qualied
person using the correct Numatic original part.
• Empty dust container frequently.
• Keep diffuser lter (where tted) clean.
DON’T
• Suck up dirt before emptying liquid from container.
• Run the machine over the power cable during operation as a hazard may occur.
• Pull on the cable to unplug the machine from the power supply.
• Walk over-wet carpets, upholstery or fabrics.
• Walk on clean carpets until fully dry.
• Spray onto people or animals.
• Attempt machine maintenance or cleaning unless the power supply plus has been removed from the
supply outlet.
• Replace any worn or damaged parts immediately.
• Use steam cleaners or pressure washers to clean the machine or use the machine in the
rain.
• Immerse in water for cleaning.
• Allow any inexperienced repairs. Call the experts.
• Use wet if oat valve is not functioning or tted.
• Use to suck up hot ashes, or lighted cigarette ends.
• Suck up liquid before emptying dirt from container.
Fault Finding
This machine can be used for wet and dry pick up.
Dry Mode
If the vacuum cleaner stops working switch off and remove the plug from the wall before
investigating were the fault lies.
If the vacuum cleaner will not pick up any debris from the surface, switch off and remove the plug from the wall,
inspect the oor tool, wands and hose for blockages, if no blockages are found, the dust bag may be full if the
dust bag is not full the lter may be blocked.
Wet Mode
If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating were the
fault lies.
If the vacuum cleaner has a blockage and will not pick up liquid, switch off and remove the plug from the wall,
has the oat valve operated, this will shut off the suction and the pitch of the vacuum motor will change Remove
the power head and empty the liquid out of the container, if the container is empty, check that the oor tool
wands and hose are not blocked.
After use always inspect the machine for damage.
Data
CVC 370
WV 370
WV 470
CVC 370
WV 370
WV 470
Motor AirFlo Suction Cleaning
Range
1200W
1200W
1200W
Capacity
Dry
15 Ltrs
15 Ltrs
27 Ltrs
40 L/sec
40 L/sec
40 L/sec
Capacity
Wet
9 Ltrs
9 Ltrs
20 Ltrs
2500 mm
2500 mm
2500 mm
28.8m
28.8m
28.8m
Size Weight Sound
355x355x510
355x355x510
355x355x710
7.1 Kgs
7.1 Kgs
9.6 Kgs
Class
II
Pressure
73-77 dB
(IEC 60704-2-1)
Uncertianty: 0.2 dB (A)
EU DECLARATION
OF
CONFORMITY
We hereby declare under our sole responsibility that the
following equipment ful ls all the relevant provisions of the
following EU Directives:
Machine Description: Vacuum Cleaner
Type: CVC, WV, WX series
Relevant standards upon which conformity is declared
include:
IEC60335-1:1991+A1+A2
IEC60335-2-2:1993+A1+A2
IEC60335-2-69:1997+A1
EN 55014-1 2001 +A1 2001, +A2 2002
EN 55014-2 1997 + A1 2001 (Cat II)
EN 50366 2003 + A1 2006
A technical construction le for this equipment is retained at
the manufacturer’s address under the authorisation of the
following signatory:
Signed:
Date: 01 /01/2013
Numatic International Limited,
Chard , Somerset.
TA20 2GB
www.numatic.co.uk
GB
13
Position: Technical ManagerName:Allyn Boyes
Manufactured by: Numatic International Limited
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
RoHS Directive 2011/65/EU
12” Plastic WV / CVC
WD-0239 (A02)
Wiring Diagram
Loading...