Kit - A1
2
Assembling the Machine
3
Using the Machine
4
5
6
7
Cleaning the Machine
8
About the machine
Voltage / Frequency
Power Rating
Weight (Ready to use)
WEEE (Waste, Electrical and Electronic Equipment)
Vacuum cleaner, accessories and packaging should be sorted for
environmental-friendly recycling.
Only for EU countries:
Do not dispose of Vacuum cleaner into household waste!
According to the European Directive 2002/96/EC on
waste electrical and electronic equipment and its
incorporation into national law.
Vacuum cleaners that are no longer suitable for use
must be separately collected and sent for recovery in
an environmental-friendly manner.
PPE
(Personal Protective Equipment)
that may be required for certain operations.
Ear Protection
Safety Footwear Head Protection Safety Gloves Dust / Allergens Protection Eye Protection Protective Clothing
Company Name
& Address
Machine yr / wk / serial number
NOTE:
A risk assessment should be conducted to determine
which PPE should be worn.
WEEE Logo
Safety Critical Components
Mains lead
HO5V2V2-F 2 x 1.00mm2
Filter Bag
NVM-1CH >pp< construction
99.6%@0.3µm
NVM-2BH >pp< construction
99.6%@0.3µm
Filter
Tritex NVM 604165 >pp< construction
96.0%@0.3µm
Microtex NVM 604311 >pp< construction 99.6%@0.3µm
Microfresh NVM 604170 >pp< construction 98.4%@0.3µm
Class 2 Symbol
CE Mark
Machine Description
Rating Label - WEEE - PPE - Safety Critical Components
Do not place more than 2.5 Kg (MAX weight) into each caddy.
Caution Floorsign
Do not place liquid in the caddy, this is a dry use machine only.
Motor Airow Suction
DATA
1200W
42 L/ Sec 2500mm
600W
Size Range Capacity Cleaning range Weight
220
390
Size Range
220
390
355x355x615 mm
355x355x665 mm
9L
31.8m 10.5Kg
15L
Size Sound Pressure Protection Class
67.5 dB - 65.2 dB
(A)
(IEC 60704-2-1)
Uncertainty 0.2 dB
1500mm
11.0Kg
Class II
9
Information for DRY USE Vacuum Cleaners
WARNING:
Read the instruction manual before using the machine.
Operators shall be adequately instructed on the use of thier machine.
As with all electrical equipment, care and attention must be exercised at all times
during use, in addition to ensuring that routine and preventative maintenance is carried
out periodically to ensure safe operation.
Failure to carry out maintenance as necessary, including the replacement of parts to
the correct standard could render this equipment unsafe and the manufacturer can
accept no responsibility in this respect. Maintenance should only be carried out by a
qualied person.
This machine is for DRY USE only and must not be stored outside or used in wet conditions.
The machine shall be disconnected from the mains by removing the plug from the supply socket during cleaning or maintenance and when replacing parts or converting the
machine to another function.
The machine is not to be used by children or persons with reduced physical, sensory or
mental capabilities, or lack of experience or knowledge, unless they have been given
supervision or instruction.
This appliance is intended to be cleaned and maintained by an adult.
Children being supervised are not to play with the machine.
This machine is not a toy.
CAUTION:
This machine is not suitable for picking up hazardous or explosive dust. Contact your
local distributor if you require a machine capable of performing these tasks.
Ensure that the ltration system tted to the machine is suitable for the material being
collected.
This vacuum cleaner is intended for indoor use in the collection of dry materials.
This machine should be stored indoors only.
NOTE:
Information for DRY USE Vacuum Cleaners
This machine is also suitable for commercial dry use, for example in hotels, schools,
hospitals, factories, shops and ofces for other than normal housekeeping purposes.
This product complies with the requirements of IEC60335-2.69.
This vacuum cleaner is tted with a thermal protection device. If the vacuum cleaner
stops working, remove the plug from the wall before investigating where the fault lies.
If the vacuum cleaner has a blockage, switch off, remove the plug from the wall,
inspect the oor tool, tubes and hose for debris. If the oor tool, tubes and hose are
clear, replace the dust bag and clean the lter.
The vacuum cleaner should be inspected after use for damage.
Not suitable for the collection of biological hazards, hazardous, or explosive dusts .
The vacuum cleaner should be stored in a dry place.
10
DO:
-Keep your machine clean including hoses and tubes.
-Change dust bag frequently.
-Keep lters clean.
-Keep diffuser lter (where tted) clean.
-Use lter bags, they will enhance performance and help keep machine clean.
-Use a Numatic Original lter bag under ne dust conditions.
-Keep hoses and tubes clear.
-Replace any worn or damaged parts immediately.
-Only use the socket outlet on the machine for purposes specied in the instructions.
-Only use the brushes provided with the machine. The use of other brushes may
impair safety.
-Regularly examine the power cord. If damage is found such as cracking or ageing the
power cord must be replaced by a qualied person.
-Only replace the power cord with the correct Numatic approved replacement part.
DON’T:
-Unreel the cable with one pull or pull on the cable to unplug the machine from the
power supply.
-Use to suck up hot ashes or lighted cigarette ends.
-Use steam cleaners or pressure washers to clean the machine or use in the rain.
-Immerse in water for cleaning.
-Attempt machine maintenance or cleaning unless the power supply plug has been
removed from the supply outlet.
Do not use in wet environments or to collect wet materials.
Do not place liquid in the caddy, this is a dry use machine only.
Do not place more than 2.5 Kg (MAX weight) into each caddy.
Do’s and Don’ts - Schematic Diagram
DRW-5347PVR - PVT Range (AUTOSAVE) WIRING DIAGRAM
11
Warranty Document
12
EU DECLARATION OF CONFORMITY
We hereby declare that the following equipment ful ls all the
relevant provisions of:
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
Machine Description: Vacuum Cleaner
Type: PVR, NSR, NST, PVT series
Manufactured by: Numatic International Limited
This equipment has been designed and manufactured
in accordance with the following harmonised European
standards:
IEC60335-1:2001 +A1:2004 +A2:2006
IEC60335-2-2:2002 +A1:2004 +A2:2006
EN 55014-1 2001 +A1 2001, +A2 2002
EN 55014-2 1997 + A1 2001 (Cat II)
EN 50366 2003 + A1 2006
A technical construction le for this equipment is retained at
the manufacturer’s address.
Signed:
Date: 12/07/10
Name:Allyn Boyes
Position: Technical Manager
Numatic International Limited,
Chard , Somerset.
TA20 2GB
www.numatic.co.uk
GB
Declaration Document
13
Optional Extra
607222
Blue
Caddy
Kit
14
ProVac Series Spare Parts
Use genuine Numatic Spare Parts.
Contact your local service engineer.
583210
604165 Tritex Filter
500972
PVR / PVT
Head
220
PVT
Drum
500966
390
PVT
Drum
15
204111 220 / 390
Castor
Spare Parts
Reorder-
220 Drum
HepaFlo Bags
Pack of 10
NVM - 1CH
604015
204104
237120
237121 Floor Tool
237154 Wand Clip
237155 Caddy Clip
607233 Red Swing Caddy
220 / 390 Rear Wheel
220 / 390 Wheel Hub
Peg
Reorder-
390 Drum
HepaFlo Bags
Pack of 10
NVM - 2BH
604016
16
recycled
paper
80%
Subject to change without prior notice.
www.numatic.com © Numatic International Limited 233855 / 06/11 (A04)
Loading...