Nacecare Sweeptec ST50BT, SWEEPTEC 50 BT Owner's Manual
OWNERS MANUAL
ST50BT
NaceCare Solutions
1205 Britannia Road East, Mississauga, ON L4W 1C7
Phone: 1-800-387-3210 Fax: 1-800-709-2896
2
SUMMARY
SUMMARY..............................................................................................................................................................................................................2
ON CONSIGNMENT OF MACHINE......................................................................................................................................................................3
INTRODUCTION......................................................................................................................................................................................................3
MACHINE DESCRIPTION AND EXPECTED UTILIZATION.................................................................................................................................3
TECHNICAL DESCRIPTION....................................................................................................................................................................................4
SYMBOLS................................................................................................................................................................................................................5
MACHINE PREPARATION.....................................................................................................................................................................................6
UNPACKING THE MACHINE.....................................................................................................................................................................................................................6
SLIDING THE MAHCINE DOWN THE PALLET........................................................................................................................................................................................6
REFUELLIING (GAS ENGINE MACHINE ONLY).....................................................................................................................................................................................6
INSTALLING THE BATTERY (BATTERY OPERATED MACHINE ONLY)...............................................................................................................................................7
CONNECTING BATTERY CHARGER..........................................................................................................................................................................................................7
BATTERY RECHARGING.............................................................................................................................................................................................................................7
GENERAL SAFETY REGULATIONS.......................................................................................................................................................................8
OPERATING THE MACHINE.................................................................................................................................................................................9
WORKING POSITION..................................................................................................................................................................................................................................9
CONTROL COMPONENTS AND THEIR POSITIONS..............................................................................................................................................................................9
START UP.......................................................................................................................................................................................................................................................9
WORK.................................................................................................................................................................................................................... 10
UPON COMPLETION OF WORK........................................................................................................................................................................ 12
MAINTENANCE OPERATIONS .......................................................................................................................................................................... 13
CLEANING THE FILTER..............................................................................................................................................................................................................................13
ADJUSTING THE SIDE BRUSH................................................................................................................................................................................................................14
ADJUSTING THE CENTRAL BRUSH........................................................................................................................................................................................................14
ENGINE MAINTENANCE..........................................................................................................................................................................................................................14
MAINTENANCE PROCEDURES REQUIRING THE INTERVENTION OF PROFESSIONALS...........................................................................................................14
TROUBLE SHOOTING GUIDE:............................................................................................................................................................................ 15
THE CENTRAL BRUSH DOES NOT CLEAN............................................................................................................................................................................................15
THE MACHINE CREATES AIRBORNE DUST WHEN WORKING.......................................................................................................................................................15
EXCESSIVE OR ABNORMAL NOIS FROM THE CENTRAL BRUSH...................................................................................................................................................15
SCRAPPING OF THE MACHINE........................................................................................................................................................................ 16
3
On consignment of machine
When the machine is consigned to the customer, an
immediate check must be performed to find out whether the
machine has suffered damage during transportation. If
damage has occurred, get the shipping agent to verify
immediately the amount and nature of the damage suffered
and at the same time informs our claim department. It is only
by prompt action of this type that compensation for damage
may be successfully claimed.
Introduction
Any machine can work efficiently and successfully only when
used properly and maintained in fully efficient working order.
We therefore invite you to read this instruction manual
thoroughly and to resort it whenever difficulties arise while
working with the machine. Besides we inform you that our
Customer Service in co-operation with our agents are always
at your disposal for any question or for direct intervention.
Machine description and expected
utilization
SWEEPTEC 50 BT is a battery-powered electric sweeping
machine used to clean both interior and exterior surfaces
paved with concrete and asphalt or covered with tiles. It is
designed to work on dry surfaces but can also work on wet
surfaces if the suction system is kept closed.
Machines are provided with: a central brush to brush up and
collect dirt, a side brush for cleaning corners, a suction system
with a filter to prevent dust form being blown into the
atmosphere and a dirt collection bin.
Do not use the machines for other purposes but the above
mentioned.
4
TECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION U/M Sweeptec 50BT
Cleaning width mm 650
Working capacity m2/h 2600
Maximum hill climbing % 10
Size of central brush mm 500
Volume of dirt hopper l 40
Electric engine V 12
Electric engine W 600
Filter surface area m2 2.5
Traction mechanical
Forward speed km/h 4
Machine length mm 1430
Machine height mm 1000
Machine width mm 660
Battery V/Ah 12/140
Battery weight kg 28,5
Machine weight (empty and without battery) kg 75
Noise level (IEC 704/1) dB (A) 68
Vibration level m/sec.2 0,12
5
SYMBOLS
Filter shaker
Suction interruption
Side brush
Wearing the protection headset
Pay attention to hot parts
ON / 1
On/off (battery-operated machine only)
Indicates the battery charge level (battery-operated machine only)
Open book symbol
Indicates the user to carefully read this manual before using the machine.
Warning symbol
Carefully read paragraphs preceded by this symbol, for user and machine safety.
Loading...