Nacecare ST 360 User Manual

NaceCare Solutions

1205 Britannia road east

Mississauga, Ontario, Canada

L4W 1C7

Toll Free: 1 800 387 3210

Toll Free Fax: [phone]

ST 360

2

TABLE OF CONTENTS

....................................................................................................................................................................... 1

TABLE OF CONTENTS ...................................................................................................................................2

DELIVERY OF THE MACHINE.........................................................................................................................3

INTRODUCTION..............................................................................................................................................3

TECHNICAL DATA ..........................................................................................................................................4

SYMBOLS USED ON THE MACHINE...............................................................................................................5

PREPARATION OF THE MACHINE .................................................................................................................6

MOVING THE MACHINE WHEN PACKED............................................................. 6

UNPACKING THE MACHINE....................................................................... 6

CONNECTING THE BATTERY CHARGER ............................................................ 7

RECHARGING THE BATTERIES ................................................................... 7

BATTERY LEVEL INDICATOR ..................................................................... 7

SQUEEGEE ................................................................................... 8

FITTING THE DISC BRUSH ....................................................................... 9

DETERGENT SOLUTION ......................................................................... 9

RECOVERY TANK .............................................................................. 9

GENERAL SAFETY RULES...........................................................................................................................10

CONTROLS ....................................................................................................................................................11

MAIN CONTROLS.............................................................................. 11

OPERATING THE GEAR LEVERS ................................................................. 13

SUCTION .................................................................................... 15

HORN....................................................................................... 15

SOLUTION LEVEL ............................................................................. 15

UPON COMPLETION OF WORK....................................................................................................................16

DAILY MAINTENANCE .................................................................................................................................. 17

CLEANING THE RECOVERY TANK ................................................................ 17

CLEANING THE SQUEEGEE ..................................................................... 17

REPLACING SQUEEGEE RUBBER BARS ........................................................... 18

RELEASING THE DISC BRUSH ................................................................... 18

CLEANING THE FILTER AND THE SOLUTION TANK................................................... 18

CLEANING THE SUCTION HOSE .................................................................. 19

CLEANING THE SUCTION MOTOR FILTER .......................................................... 19

OPERATION CONTROL ...............................................................................................................................20

NOT ENOUGH WATER ON THE BRUSH ............................................................ 20

MACHINE DOES NOT CLEAN EFFECTIVELY ........................................................ 20

SQUEEGEE DOES NOT DRY PERFECTLY .......................................................... 20

SUCTION DOES NOT WORK ..................................................................... 21

BRUSH MOTOR DOES NOT WORK ................................................................ 21

TRACTION MOTOR DOES NOT WORK ............................................................. 21

TOO MUCH FOAM FORMATION .................................................................. 21

THERMAL PROTECTIONS ....................................................................... 21

TRANSPORTING THE MACHINE........................................................................................................................................... 22

ST360_V05-2

3

Delivery of the machine

When the machine is delivered, please check
immediately that all materials match the delivery
documents and that the machine has not been
damaged during transport. If so, ask your shipping
agent to assess the extent of the damage and
inform our customer care service at once. Prompt
and appropriate action is the only way to obtain the
missing parts and to be able to claim damages.

ST360_V05-2

TECHNICAL DATA

4

ST360

TECHNICAL DATA UNIT

Working width Inches 21"
Squeegee width Inches 25.5"
Working capacity Sq feet/h 31,500
Brushes Inches 1 x 21"
Brush rpm RPM 200
Brush pressure LBS 100
Brush motor Volts V 24
Brush motor Watts W 400
Traction speed mph 0 - 4.5
Max grade capability % 10%
Suction motor Volts V 24
Suction motor Watts W 480
Solution tank Gallon 24
Recovery tank Gallon 27
Turning radius Inches 53"
Machine length Inches 48.5"
Machine width Inches 25.5"
Machine height Inches 62"
Batteries (No.) V/AH 24/240AH 4x6V
Battery weight Lbs 71lbs x 4
Machine weight without batteries Lbs 496

ST360_V05-2

5

SYMBOLS USED ON THE MACHINE

Symbol for brush head up/down.
It indicates the brush head up/down pedal.

Symbol for battery charge level.

Symbol for squeegee up/down.
It indicates the up/down pedal of the squeegee.

Symbol for water flow.

Symbol for the horn button.

OFF/0 ON/1

Symbol for on/off switch.

Symbol for forward and reverse switch.
Its position shows the direction of the machine, either forwards or reverse.

Symbol for maximum temperature of solution.

Symbol for drain hose on the recovery tank.

Symbol for fuse panel

Symbol for levers in brake position

Symbol for the hourmeter

ST360_V05-2

6

PREPARATION OF THE MACHINE

MOVING THE MACHINE WHEN PACKED

The machine comes in special packaging which includes a
platform for fork -lift transport. Do not place skids one on top
of the other.
The overall weight is 540Lbs.

Packing size is:

A : 60"
B : 29"
C : 52.5"

A

C B

UNPACKING THE MACHINE

Remove the box.
The machine is fixed to the skid by wheel -blocks.
Remove the wheel blocks.

Push the machine backwards off of the skid using a ramp.
Avoid hitting the brush head on the skid.

Keep the skid for future transport.
The suction head, is located inside the
battery compartment.
NOTE: to move the machine without batteries push the
drive levers forward.

ST360_V05-2

7

CONNECTING THE BATTERY CHARGER

The connectors are fitted on the battery compartment. Plug the
connector of the battery charger cables into the socket on battery
compartment. The battery connector is delivered inside the bag
where you found this instruction booklet.

BATTERY LEVEL INDICATOR

The battery level indicator is operated by a microprocessor. The
LEDs display the approximate level of charge:

4 = max. charge level, 3 = ¾ charge level,
2 = ½ charge level, 1 = ¼ charge level,
0 = flat batteries (blinking light).

ATTENTION: a few seconds after the “=” is shown, the brush

motor switches off automatically. However, with the residual
charge, the floor can be dried before recharging

ST360_V05-2

-

17 ¾”

+

-

+

+

-

+

TO MACHINE

-

NOTE: Battery box will accept Trojan T125 Batteries (10 3/8” L x 7 3/8” W)

REAR OF BATTERY BOX