Müller SC 18.10 pro, SC 28.X0 pro, SC 28.X1 pro User guide
Instruction Manual
Time switch
3. Menu overview 4. Symbol legend
5. Key function 6. Handling advice 7. Channel ON OFF / Permanent P
1. To access the Enter- mode (program, adjust ments, options) from t he automatic-mode.
2. To revert to the beginning of the current (sub-) menu.
1. To adjust the flashi ng digit.
2. To scroll through a choice
1. Automatic-mode: To swit ch the channel ON or OFF until the ne xt programming step occu rs.
2. Automatic-mode: A push lon ger than 3 sec. = Permanent switching st atus (7).
1. To activate the time switch when operated without power supply.
2. To confirm the selection o r the entered data.
8. New Program (See also the example (9)) 9. Example „New Program“ (For a regular switching time)
Step A. to C. please refer to point 9. (Example “New Program”)
10. Pulse 11. Program permanent
Program -> New program -> Channel A/B -> …
The pulse function provides you the opportunity of programming a switching time with a defined duration.
As soon as the pulse-duration ha s expired the time switch switc hes OFF automatically (the duration of the pulse is up to 59:59 mm:ss).
The programming is carried out like a standard switching time (see point 8 / 9) with following differences
Choose Pulse function (9F).
Define the duration of t he pulse (pulstime minute / pulstime second).
Program the days of the w eek
Program the switching time (t ime hour / time minute)
Validation: Confirm the blinking summary of the pulse program
12. Additional adjustments 13. Program modify
Menu Main me nu Applicat ion
Program query
Program copy
Program delete
Date-Time
Summertime
Language
Factory Defaults*
Counter
PIN-Code
Reset-Function
GB
Connection diagram Directory 1. Safety instructions 2. Initial operation
SC 28.10 pro / 172 410 pro
SC 28.11 pro / 172 411 pro
1 channel
SC 28.20 pro / SC 28.21 pro / SC 172 420 pro / 172 421 pro
2 channels
To query the programming steps and remaining memory locations
Program
Copy from one channel to another. Memory of the channel won’t
be overwritten; the copied switching steps appear additionally.
Program
!
Permanent by date function is not copied!
Deletion of switching time( s). The program for all channel s, single
channels and single programming steps within on channel can be
Program
deleted.
Adjustment of date and time
Adjustment
Adjustment of the dayli ght saving time mode ( ON/OFF)
Adjustment
Choice of languages
Adjustment
Reset to the state of delivery.
Adjustment
Press all front keys for 2 seconds. The time switch is reset. The values for date
and time will be deleted and have to be re-entered. The switching program has
not been deleted!
!
Date, time and switching program will be lost!
Displays the hour counter and pulse counter for each channel and
Options
the time switch itself.
The time switch can be locked with a 4-digit PIN-Code. The code
can be adjusted, activated and deactivated. If you have forgotten
Options
the Code please call c ustomer service.
SC 18.10 pro / 170 410 pro
1. Safety instructions
2. Initial operation
3. Menu overview
4. Symbol legend
5. Key function
6. Handling advice
7. Channel ON OFF / Permanent P
8. New Program
9. Example „New Program“
10. Pulse
11. Program permanent
12. Additional adjustments
13. Program modify
*
14. Data-key
Program -> Program modify -> …
Within Program modify each single switching time can be modified.
14. Data-key*
With a Data-key following activities are possible:
!
The installation and assem bly of electrical equipme nt
must be only carried out only by a skilled Person!
Otherwise fire danger or danger of an electric shock
exists!
!
Connect the supply voltage/frequency as stated on the
product label!
!
Warranty void if housing opened by unauthorised
person!
!
The electronic circuit is protected against a wide range
of external influences. Incorrect operating may occur if
external influences exceed certain limits!
The time switch is programmabl e without external power suppl y after
pressing the
To revert one step or one level back while in the Enter-Mode press .
After completion of a (sub-) me nu confirming end will return the device
into the automatic-mode.
With the choice changes from end to continue. By confirming
continue the time switch ret urns to the beginni ng of the current
(sub-) menu.
When confirming end before completion, the time switch returns to the
automatic-mode without saving the entered data.
Save data: Writes the data fr om the time switch into the m emory of the Data-key.
Program timeswitch: Writes the data located inside th e Key into the memory.
Key function: The time switch will solely apply programming steps from the Data-
key. The switching program of the time switch is suppressed.
Key readout: To query the switching program of the Data-key.
müller SC 18.10 pro / SC 28.X0 pro / SC 28.X1 pro paladin 170 410 pro / 172 4X0 pro / 172 4X1 pro
The time switch is delivered in sleep-mode, the display is switched off.
Press -button for 1 second.
The current date and time is already programmed and European daylight
savings time is activated.
Select the desired language by pressing -buttons and confirm it by
pressing
the current position)
If required, date, time and daylight savings time mode can be adjusted also
by pressing
Channel is switched ON
Channel is switched OFF
For the current date t he “holiday program ” / “permanent by date ” is activated
Standard programming step
Current state is based on a manual over-ride. The st ate will be cancelled with th e next programming step.
Current state is based on a manual over-ride. The state is perman ent until terminated ma nually (7).
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
Element within sub-menu “program delete”
The time switch is locked; to unlock the device the PIN has to be entered (12).
-button.
A. If power supply is disconnected press for one second. The display appears in Automatic-Mode.
B. Press
, the time switch is now in the Enter-Mode.
Program with .
C. Confirm
D. Confirm
new program with .
E. Choose the desired channel with
F. For regular switching times choose
G. Within this level you activate the days of the week (1…7) on which the switching time should happen.
you activate “yes” or deactivate “no” the corresponding date. Confirm each day with .
With
H. Adjustment of the time: Hours
I. Verify the entered swit ching time: If the flashin g summary of the programmi ng step is correct, verif y
off with
J. If you want to proceed with programming, confirm
Program -> new program -> channel A/B -> permanent -> …
. After verification you hav e the choice between edit/delet e and end with .
To leave the programming menu confirm
One permanent by date programming step (holiday function) for each channel is possible. During the
desired period (The f unction is valid for t he whole days) the c hannel can be switched off (
off
) or on (permanent on).
The programming of this function is as described in (8 / 9).
The choice permanent will not be offered anymore within the menu new program when already in
use. The switching time can be mo dified and deleted within
delete
(12) respectively.
. (Remark: By pressing you move one step backwards from
-buttons and a subsequent confirmation with .
ON OFF
Channel
By pushing -but tons ( -butt ons) a manual switch of the
channels take place. The resulting swit ching status is mark ed
with the hand-symbol and remains until the next programming
step occurs. (temporary over-ride)
Permanent switching stat us P
By pressing the corresponding channel button
than 3 sec. the channel is permanently switched ON or OFF.
The status remains unti l the next manual swit ching occurs (> 3
sec.). (permanent over-ride)
and confirm with .
on or off with -buttons and confirm with .
and . Minutes and .
next switching with .
end.
Program modify (13) and Program
*OPTIONAL
for more
on or
permanent
www.hugo-mueller.de
BA SC1810,28X0,28X1pro MP; DE, GB, FR, IT - 22397 - 2007.12-03
Loading...