MYTRAK Mobile User Manual
MytrakMobileUserManual
Congratulations on receiving your Mytrak Mobile!
The Mytrak Mobile health solution is a Wearable Device and Web Portal
Experience that is a personal health coach that constantly monitors physical and
lifestyle activity to guide you towards your selected health goals.
The Web Portal is used to determine
Each time you plug the Mytrak Mobile into your PC, your data is automatically
sent to your Portal Account, where your current health state, goals, and activity
targets are analysed. Feedback, recommendations, hints & tips and new health
goals can then be downloaded to the Mytrak Mobile when it is synced.
MytrakMobileLightRing
The M2 is a hip mounted device that
communicates the current level of success
towards the end of day goal. Each update is
available at the push of a button and easily viewed
by the user. Each segment of the M2 has three
possible colours. In general, a Green light in any
section is an indication you are on pace to reach
or surpass you goal. A Yellow light is any segment
is an indication that you are just off your pace to
reach you goal for the day and potentially the
week. A Red light is an indication that a major
change needs to occur in order to reach your M2
goals.
Remember the M2 is a coach and will tell you
what you need to do to reach your health and
fitness goals. Goodluck and remember to GO FOR
GREEN!
MytrakMobileSystem
The Mytrak Mobile consists of the Mytrak Mobile device, a belt clip and USB
cable for connection to a PC. You will also need to use a PC with the following
minimum configuration.
• Windows XP Home Edition (or higher) or Windows Vista
• CPU: Pentium 4 (or higher)
• Memory: 500 Mb
• Free Disk Space: 1 Gb
• Internet Connection
• 1 free USB port
If your PC does not meet the above requirements you will not be able to install
and run the software (the software check for this information during installation
and will let you know if these requirements are not met).
You will need to sign up to the Mytrak Portal and create a member account,
using the product ID number on the packaging of your device.
During the account setup process you will be asked to download a desktop
application onto your PC and plug in your Mytrak Mobile.
DO NOT PLUG IN THE MYTRAK MOBILE UNTIL YOU ARE PROMPTED.
This registration process will bind your Mytrak Mobile permanently to you and
your personal web portal account. Treat your Mytrak Mobile like a bank card or
health card. Do not let anyone else use your Mytrak Mobile as this may adversely
affect your results. This ensures that all your personal data is kept safe and
secure.
QuickStart
Following the instructions below will allow you to get a quick and easy start to
using your Mytrak Mobile. (Internet connection is required)
Step 1: Setting up your Mytrak Portal Account.
1. Do NOT plug your Mytrak Mobile into the computer until prompted!
2. Open your internet browser and navigate to: www.mytrakhealth.com
on the ling to create a Mytrak account.
3. Follow the step by step instructions on the screen. You may be asked for the
Product Code on the packaging.
4. When you are asked to download the desktop application, you may need to
turn off any pop-up blocker in your internet browser, or accept application
installs by your anti-virus software.
5. When prompted, Plug-in the Mytrak Mobile and follow the on-screen
instruction to bind your Mytrak Mobile to your portal account.
6. Congratulations! Your Mytrak Mobile is now set.
7. Leave the Mytrak Mobile plugged in until the battery is fully charged, as
indicated by the desktop application. The Mytrak Mobile is normally charged
after 2 hours, but may require 4 hours, particularly on the first time and if it
becomes fully discharged.
and click
UsingYourMytrakMobile
Each time you plug in the Mytrak Mobile to your PC, it will automatically
recognise your device and launch the desktop application. (if this does not
happen, then you can launch the application manually by navigating to the
Loading...