Mytee VAS525 Vanquish Instructions Manual
Instructions for
New & Reconditioned Equipment & Parts - www.southeasternequipment.net
VAS525 Vanquish™ Air Scrubber
Please read before use.
Register your product
at http://www.mytee.
com/support/register
General Information p. 2
Features & Switch Plate p. 4
Congurations & Operation p. 5
HEPA Filter Replacement p. 7
Parts & Pricing p. 8
Notes p. 10
13655 Stowe Dr., Poway, CA 92064
1
Model #
Serial #
Form # ADM-VAS525
3-17
GENERAL INFORMATION
New & Reconditioned Equipment & Parts - www.southeasternequipment.net
Dear Customer:
Congratulations on the purchase of your new Vanquish™ Air Scrubber! The scene
of the equipment world is becoming more high tech, and we at Mytee Products Inc.
strive to keep you on the cutting edge with superior quality and technology.
With simple maintenance the Vanquish™ Air Scrubber will give quality performance for many years to come. Keep in mind that neglect or abuse to the
Vanquish™ will cause unnecessary damage and void the warranty. If warranty
questions arise, please get in touch with your distributor from whom you purchased
this equipment.
Before rst use of your new product, please read this manual thoroughly. Thank
you for choosing Mytee!
Sincerely,
Mytee Products, Inc.
Parts & Service
Do not alter or modify your Vanquish™ Air Scrubber in any way. Repairs, when required, should be performed by Mytee service personnel or a Mytee Authorized Ser-
vice Center using original Mytee replacement parts and accessories. Modications
or use of unauthorized par ts could create a hazard and will void your warranty.
Please specify the Model and Serial Number when discussing your product. For a list
of Authorized Mytee Service Centers, visit our website at ww w.mytee.com.
Grounding Instructions
This machine must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electrical shock. This machine is equipped
with a cord having an equipment-grounding conductor and grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed in accordance with all local code and ordinances. Do not remove ground pin; if missing,
replace plug before use.
Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualied electrician or service person if you are
in doubt as to whether the outlet is properly grounded. Do not modif y the plug
provided with the machine. If it will not t the outlet, have a proper outlet installed
by a qualied electrician.
This appliance is for use on a nominal 120-volt circuit, and has a grounding plug
that looks like the plug illustrated in Figure 1 below. A temporary adapter illustrated
in Figures 2 and 3 may be used~to connect this plug to a 2-pole receptacle as
shown in Figure 2 if a properly grounded outlet is not available. The temporary
adapter should be used only until a properly grounded outlet (Figure 1) can be
installed by a qualied electrician. The green colored rigid ear, tab or the like
extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box cover. Whenever the adapter is used, it must be held
in place by a metal screw. Grounding adapters are not approved for use in Canada.
Replace the plug if the grounding pin is damaged or broken.
The Green (or GreenYellow) wire in the cord is the grounding wire. When replacing
a plug, this wire must be attached to the grounding pin only.
DO NOT use extension cords.
Please Note for America use only
Grounding Pin
Figure 1
Grounded Outlet
Metal
Screw
Grounded Outlet Box
Figure 2 Figure 3
Adapter
Tab for Grounding
Screw
Parts and Service
Repairs, when required, should be performed by Mytee service personnel or Mytee
authorized Service Center using Mytee original replacement parts and accessories. Call your local service center for repair parts or service. Please specify the
Model and Serial Number when discussing your machine.
Name Plate
The Model and Serial Number of your machine are shown on the Nameplate on the
back panel of the machine. This information is needed when ordering repair parts
for the machine. Use the space provided on the front cover to note the Model and
Serial Number of your machine for future reference.
Unpacking the Machine
When the machine is delivered, carefully inspect the shipping carton and the
machine for damage. If damage is evident, save the shipping carton so that it can
be inspected by the carrier that delivered it. Contact the carrier immediately to le
a freight damage claim.
Caution and Warnings
Symbols
Mytee uses the symbols below to signal potentially dangerous conditions. Always
read this information carefully and take the necessary steps to protect personnel
and property.
Is used to warn of immediate hazards that will cause severe personal injury or
death.
Is used to call attention to a situation that could cause severe personal injury.
Is used to call attention to a situation that could cause minor personal injur y or
damage to the machine or other proper ty. When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this machine. This product is intended for commercial use only.
INHALATION HAZARD
Avoid breathing mold spores, bacteria, and other hazardous particles
that may be present. Always wear a NIOSH-approved respirator when
operating the unit, doing a lter change, and when cleaning the unit.
ELECTRIC SHOCK HA ZARD
Unit must be grounded when in use. Plug into grounded 3-prong plug
receptacle only. Disconnect power when left unattended. Disconnect
power before servicing. Do not expose to water or rain. Store indoors in
a cool, dr y place.
FIRE/EXPLOSION HAZARD
Do not use near open-ame appliances. Do not use where explosive
vapors are present in the air. Flame, gas, or deadly exhaust fume backdraft could blow out if exposed to negative air pressure.
TIP OVER HAZARD
Unit must be placed on hard, level surface when in use. Tilted or
uneven unit c ould result in serious injury. Do not stack more than two
units.
To reduce the risk of re, electrical shock, or injury:
1. Read all instructions before using equipment.
2. Use only as described in this manual. Use only manufacturer’s recommended
attachments.
3. Always unplug power cord from electrical outlet before attempting any adjustments or repairs.
4. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
5. Do not pull or carr y by cord. Do not close a door on cord or pull cord around
sharp edges or corners.
6. Do not run appliance over cord. Keep cord away from heated surfaces.
7. Do not use with damaged cord or plug. If cord is damaged, repair immediately.
8. Do not use outdoors or on wet surfaces and/or standing water.
9. Always unplug or disconnect the appliance from power supply when not in use.
10. Do not allow to be used as a toy. Close attention is necessary when used by or
near children.
11. Do not use in areas where ammable or combustible material may be present.
12. Do not leave the unit exposed to harsh weather elements. Temperatures below
freezing may damage components and void warranty.
13. Use only the appropriate handles to move and lift unit. Do not use any other
2
GENERAL INFORMATION
New & Reconditioned Equipment & Parts - www.southeasternequipment.net
parts of this machine for this purpose.
14. Keep hair, loose clothing, ngers, and all parts of the body away from all
openings and moving parts.
15. To reduce the risk of re or electric shock, do not use this machine with a solid-
state speed control device.
16. The voltage and frequency indicated on the name plate must correspond to the
wall receptacle supply voltage.
17. When cleaning and servicing the machine, local or national regulations may
apply to the safe disposal of liquids which may contain: chemicals, grease, oil,
acid, alkalines, or other dangerous liquids.
Pre-Operation
1. Inspect pre-lter for accumulated dust and dir t before each use. Replace if
neces sar y.
Setup
1. Place the Vanquish™ in position as either an air scrubber or a negative air
machine. (More information on page 6.)
2. Plug into a standard 115V outlet. The Vanquish™ needs 3.1 amps to operate.
Operation
1. Remove the intake cap.
2. Switch on the unit by turning the variable speed switch on the switch plate
clock wise (see pg. 4). Keep turning clockwise to set the speed from high to low.
After Use
1. Replace intake cap.
2. Unplug power cord from wall and wrap around intake cap.
3. Store in a dry location.
Maintenance Schedule
Maintenance item Daily Once a week
Check power supply cable
Clean machine with all purpose cleaner and cloth
Inspect machine for loose hardware
x
x
x
FAQs
Q: What comes standard with the Vanquish™ Air Scrubber?
A: The Vanquish™ comes with the Mytee HEPA lter and pre-lter pre-installed.
Q: Where do I plug the machine in?
A: The Vanquish™ requires a 115V grounded circuit. Please note: GFI outlets may
trip before the breaker setting.
Q: Is there anything I can do to incre ase the expected life of my machine?
A: Store the Vanquish™ with intake cap on. Replace lters whenever needed.
Troubleshooting
There is no power.
1. Make sure unit is plugged into a 115V outlet.
2. Make sure circuit breaker is not tripped.
Change HEPA lter light is illuminate d.
1. Replace HEPA lter. Refer to pg. 5 of this manual.
2. Make sure intake is not restricted. Eliminate bends or kinks in ducting or
remove ducting.
Blower wheel isn’t turning.
1. Check if the blower wheel is obstructed. Remove any obstruction.
2. Tighten the blower wheel set screw.
Machine Specications
Air Intake 16”
Air Outlet 8”
CFM 250-500
Circuit Breaker 12 am ps
Power
Consumption
Machine Weight 57 lbs.
Machine
Dimensions
Power Cord 25’ 14/3
3.1 amps @ 115V 60Hz
15” x 27.75” x 24.5”
3
Loading...