Mytee Speedster 1000HV, Speedster 1001HV, Speedster 1000HV-200, Speedster 1001HV-200, Speedster 1005HV Parts Manual

Speedster



Extractor

Model Numbers:

No Heater:

1000HV

1000HV-200

1005HV

Heater:

1001HV

1001HV-200

1003HV
1006HV

User and Parts Manual



www.mytee.com

Speedster

2

This manual is furnished with each new model. It
provides necessary operation and maintenance
instructions and an illustrated parts list.

Read this manual completely and understand the
machine before operating or servicing it.

Use the illustrated Parts List to order parts. Before
ordering parts or supplies, be sure to have your
machine model number and serial number handy.
Parts and supplies may be ordered by phone or mail
from any authorized parts and service center,
distributor or from any of the manufacturer’s
subsidiaries.

MACHINE DATA

Please fill out at time of purchase for future
reference.

Model No.: ______________________________

Purchase Date: ___________________________

Serial No.: _______________________________

TABLE OF CONTENTS:

SAFETY PRECAUTIONS 3

SAFETY LABELS 4

MACHINE COMPONENTS 4

PRE-OPERATION 5

MACHINE SET UP 5

WHILE OPERATING 7

DRAINING RECOVERY TANK 7

MACHINE MAINTENANCE 8
DAILY MAINTENANCE 8
WEEKLY MAINTENANCE 8

STORING MACHINE 9

TROUBLESHOOTING 9

REPLACEMENT PARTS 11

ELECTRICAL DIAGRAMS DWG 1 of 5

ASSEMBLY PARTS LIST DWG 2 of 5 (Assembly)
DWG 3 of 5 (Vac Tank)
DWG 4 of 5 (Sol Tank)
DWG 5 of 5 (Base)

GROUNDING INSTRUCTIONS 3

www.mytee.com

Speedster

carpet and upholstery in an indoor

All operators must read, understand and practice the

Unless operator manual has been read

electrocution can result. Always unplug machine

cause an explosion or fire. Do not use flammable

malfunction or breakdown, grounding provides a

3

SAFETY PRECAUTIONS

This machine is intended for commercial use. It is
designed to clean
environment and is not constructed for any other
use. Use only recommended cleaning solutions and
accessory tools.

following safety precautions.

The following safety alerts symbols are used
throughout this manual as indicated in their
description:

WARNING: To warn of hazards or unsafe

practices which could result in severe personal
injury or death.

FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.

The following information signal potentially
dangerous conditions to the operator or equipment:

FOR SAFETY:

1. Do not operate machine:

2. Before operating machine:

3. When using machine:

♦♦♦♦ Unless trained and authorized.
♦♦♦♦

and understood.

♦♦♦♦ In flammable or explosive areas.
♦♦♦♦ Unless cord is properly grounded.
♦♦♦♦ With damaged cord or plug.
♦♦♦♦ If not in proper operating condition.
♦♦♦♦ In outdoor areas.
♦♦♦♦ In standing water.
♦♦♦♦ With the use of an extension cord.

♦♦♦♦ Make sure all safety devices are in

place and operate properly.

♦♦♦♦ Do not run machine over cord.
♦♦♦♦ Do not pull machine by plug or cord.
♦♦♦♦ Do not pull cord around sharp edges

or corners

♦♦♦♦ Do not unplug by pulling on cord.
♦♦♦♦ Do not stretch cord.
♦♦♦♦ Do not handle plug with wet hands.
♦♦♦♦ Keep cord away from heated surfaces.
♦♦♦♦ Report machine damage or faulty

operation immediately to your
distributor.
♦♦♦♦ Follow mixing and handling
instructions on chemical containers.

4. Before leaving or servicing machine:

♦♦♦♦ Turn off machine.
♦♦♦♦ Unplug cord from wall outlet.

5. When servicing machine:

♦♦♦♦ Unplug cord from wall outlet.
♦ Avoid moving parts.
♦♦♦♦ Do not wear loose jackets, shirts, or

sleeves.
♦♦♦♦ Use manufacturer supplied or
approved replacement parts.

WARNING: Hazardous Voltage. Shock or

before servicing.

WARNING: Flammable materials can

materials in tank(s).

WARNING: Flammable materials or

reactive metals can cause an explosion or fire.

GROUNDING INSTRUCTIONS

Machine must be grounded. If it should

path of least resistance for electrical shock. This
machine is equipped with a cord having an
equipment-grounding conductor and grounding
plug. The plug must be plugged into an
appropriate outlet that is properly installed in
accordance with all local code and ordinances.
Do not remove ground pin; if missing, replace
plug before use.

www.mytee.com

SAFETY LABELS

4

explosion or fire.

The safety labels appear on the machine in
the locations indicated. Replace labels if
they become damaged or cannot be read.

MACHINE COMPONENTS

1

3

2

Speedster

WARNING: Flammable materials can
cause an explosion or fire. Do not use
flammable materials in tank(s). Flammable
materials or reactive metals can cause

WARNING LABEL- Located on back.
Label warns operator of safe practices of
equipment

1. Recovery Tank

2. Solution Tank

3. Motor housing/ Base

www.mytee.com

Speedster

5

cause an explosion or fire. Do not use flammable

PRE-OPERATION

1. Vacuum carpet and remove other debris.

2. Perform MACHINE SETUP procedures.

3. Inspect power cord for damage.

3. Attach solution hose. (Located front of
machine.)

MACHINE SET UP

1. Carefully check carton for signs of damage.
Report damage at once to freight carrier. The
machine is shipped fully assembled and is
ready for use.

2. Open lid of solution tank. Fill solution tank
with water or approved cleaning agent.

NOTE: Make sure the quick
disconnects snap together firmly. As
you do this, always inspect hoses for
cracks or fraying. Do not use if hoses
are damaged.

4. Attach other end of solution hose to wand.

WARNING: Flammable materials can

solutions or materials in tank(s).

FOR SAFETY: When using machine, follow
mixing and handling instructions on chemical
containers.

ATTENTION: If using powdered cleaning
chemicals, mix prior to adding.

5. Attach vacuum hose to recovery tank.

www.mytee.com