Mytee Speedster 1000DX-200, Speedster 1000DX, Speedster 1001DX, Speedster 1001DX-200, Speedster 1003DX Instructions Manual
...
Instructions for
1000DX, 1000DX-200, 1001DX,
1001DX-200, 1003DX, 1005DX Speedster
Please read before use.
Register your product
at www.mytee.com/help
®
1000DX & 1000DX-200 p.3
1001DX & 1001DX-200 p.9
1003DX p.15
1005DX p.21
General information p.27
Model #
Serial #
Form # ADM-Speedster
12-10
13655 Stowe Dr., Poway, Ca. 92064
1
2
1000DX & 1000DX-200 SPEEDSTER
1000DX & 1000DX-200 SPEEDSTER® BACK1000DX & 1000DX-200 SPEEDSTER® FRONT
10
9
8
1. Switch plate
2. 2” Male Cuff-Lynx™
3. Solution lid
4. Female quick disconnect (QD)
5. Front handle
1
2
6. Front vent
7. Bottom handle
8. 5” locking casters
9. Solution tank
10. Recovery lid
11
12
3
4
5
13
14
6
7
11. Recovery tank
12. Push handle
13. Drain valve
14. Power cord
16
15. Back vent
16. 12” Rear wheels
15
1000DX & 1000DX-200 SPEEDSTER® ITEMS INCLUDED
H110 Cuff-Lynx™ H141 Cuff-Lynx™
2” Hose Adapter 2” Hose Reducer to 1.5”
H375- Hose Hanger H226 Drain Elbow
(4) screws
1000DX & 1000DX-200 SPEEDSTER® CORD
Plug the power cord into a single, 20A grounded wall outlet.
3
1000DX & 1000DX-200 SPEEDSTER
1000DX & 1000DX-200 SPEEDSTER® VAC/SOL
HOSE CONNECTIONS
Attach one end of a solution hose to a wand or other tool, the other
end to the Speedster’s® front quick disconnect. Attach one end of
a vacuum hose to the tool, the other end to the Speedster’s® CuffLynx™ vacuum hose port.
1000DX & 1000DX-200 SPEEDSTER® SWITCHES
Vac 1 Vac 2
Pump
Turn on Vac 1, Vac 2 and Pump switches.
1000DX & 1000DX-200 SPEEDSTER® FILL
SOLUTION TANK
Lift lid and manually ll the tank.
1000DX & 1000DX-200 SPEEDSTER® BALL FLOAT
An internal ball oat automatically turns off the machine’s vacuum
when the water in the solution tank reaches its maximum level.
Empty the recovery tank as needed using the rear drain valve.
4
1000DX & 1000DX-200 SPEEDSTER
1000DX & 1000DX-200 SPEEDSTER® DUMP VALVE
Attach the 45˚ drain elbow to the drain spout in back. Lift up the
dump valve and empty the tank.
1000DX & 1000DX-200 SPEEDSTER
®
FILTER MAINTENANCE
INTAKE
FILTER
Check and clean solution tank lter daily by twisting off, rinsing with
clean water and replacing.
1000DX & 1000DX-200 SPEEDSTER
®
LOCKING CASTERS
Locking casters help keep the machine remain stationary during
use.
MYTEE® SYSTEM MAINTAINER
Weekly ushing of the solution system with Mytee® System
Maintainer helps keep lines clean and prevents chemical build-up,
improving pump life, performance and pressure.
5
1000DX & 1000DX-200 SPEEDSTER
F
1
2
E
D
C
B
A
PRODUCTS, INC.
858-679-1191
speedster
mytee
TITLE:
DATE
10/12/10
NAME
J. Cash
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
CHECKED
DRAWN
REV
SHEET 1 OF 2
1
DO NOT
SCALE DRAWING
1000DX
DWG. NO.
C
SCALE: 1:8
SIZE
2
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS
PROHIBITED.
MSRP
3
1 $1.99 ea
1 $8.99 ea
2 $0.99 ea
2 $6.99 ea
1 $20.99 ea
valve, drain, 1-1/2"
bracket, "L" (all extracters)
bracket, front hinge, sp/fb
4
1 $31.99 ea
1 $6.49 ea
QTY.
DESCRIPTION
filter, strainer, 1/2"
1 $2.49 ea
nipple, brass, 3/8" x close
bushing, brass, 1/2"mpt x 3/8" fpt, hex
hose, 3/8" x 17-1/2", (OAL), f x -fsw, surge, 1600psi
5
6
PART NO.
NO.
ITEM
AH105
54
B119A
55
B216
B210
H378
H316 bolt, 1/4-20 x 1-1/2" hex head, s/s
H225
H390A
59
60
61
58
57
56
$7.99/ft
1 $3.19 ea
1 $6.49 ea
spout, drain, 45 degree
1 $11.49 ea
1 $6.99 ea
1 $18.49 ea
pipe, pvc, 2" 1
elbow, 2" float
float, 2", ball style
adaptor, pvc 2, fmsl x fmt
1 $11.99 ea
1 $36.99 ea
1 $15.99 ea
gasket, 7", vac lid
lid, vac tank, black, 7"
elbow, inlet assembly 2"
1 $2.49 ea
6 $0.99 ea
1 $190.99 ea
gasket, 2" inlet
vac tank, speedster
screw, #8 x 5/8 phil oval, s/s
gasket, cam fitting polyethylene, 2.35" OD 1.90" ID
H226
62
G002
63
P684
64
P682
65
H490
66
P726
67
A926
68
G091
69
G090
70
H304
71
P733
72
G083
73
2 $0.99 ea
2 $0.99 ea
1 $6.99 ea
1 $10.99 ea
1 $3.99 ea
3 $13.99 ea
inlet, 2"
washer, #8 flat, s/s
plate, switch, sp, 3 hole
switch, rocker, 2 position
Cuff-Lynx, 2" m cuff x 2" mpt
screw, #10-32 x 1/2" SHCS, alloy
H135
74
E515
75
H338
76
H389
77
H612
78
P685
79
$8.99/ft
MSRP
1 $208.99 ea
QTY
DESCRIPTION
pump, 220psi, demand, 120V
C322D
PART NO.
44
NO.
ITEM
1000DX-200
$8.99/ft
MSRP
1 $74.99
1 $9.99 ea
2 $4.99 ea
QTY
DESCRIPTION
gasket, strip, 3/4" x 36" x 1/8"
filter, bag, vac tank, drawstring
power cord, ext, 50', 12/3, black
E530
G010
G085
PART NO.
Items Not Shown
1 $3.99 ea
1 $3.99 ea
1 $10.99 ea
hanger, wire formed, hose
Cuff-Lynx, 2" to 1.5" reducer
Cuff-Lynx, female swivel x female thread 2"
H375
H140
H141
3
4
5
6
8 $0.99 ea
2 $2.99 ea
QTY.
7
10 $0.99 ea
DESCRIPTION
guard, cooling fan, wire
screw, #10 x 5/8" hex head, zinc
8 $0.99 ea
2 $6.99 ea
19 $0.99 ea
2 $23.19 ea
13 $0.99 ea
1 $141.99 ea
caster, 5"
washer, 1/4" flat, s/s
handle, breeze and dx
washer, 1/4"id x 1"od, flat, s/s
base, speedster
nut, lock, 1/4-20 nylon insert
bolt, 1/4-20 x 1" hex head, s/s 8 $0.99 ea
4 $0.99 ea
washer, axle, cut 1/2" id
2 $41.99 ea
2 $0.99 ea
1 $9.99 ea
wheel, 12"
cap, axle, 1/2"
axle, 18.25" x .50" dia
1 $1.99 ea
nut, lock, 1/2" steel
connector, cord lock
1 $4.99 ea
bolt, 1/4-20 x 1/2" serrated hex flange, zinc
8
PART NO.
NO.
ITEM
H343
1
H296
2
H770
3
F
H211
4
H485
5
H210
6
H342
7
H666
8
H216
9
P731
10
H254
11
H251
12
E
H219
13
H371
14
H221
15
G131
16
1 $11.49 ea
1 $3.19 ea
8 $0.99 ea
1 $13.49 ea
1 $15.99 ea
2 $8.99 ea
6 $3.99 ea
11 $0.99 ea
fitting, strain relief, cord
plate, manifold, parallel
bolt, 1/4-20 x 1/2", hex head, zinc
power cord, pigtail, 30", 12/3, black
bolt, 1/4-20 x 3/4" serrated hex flange, zinc
E550
H220
H201
H601
H768
17
18
19
20
21
D
2 $103.99 ea
gasket, vacuum motor
vac support, 2 stage, 3-1/8"
manifold, dual vac, parallel
vac motor, 2 stage high performance
P750
H500
C310
G004
22
23
24
25
1
1 $12.49 ea
2 $4.99 ea
exhaust boot, plastisol
vac hose, 2", wire reinforced
cuff hose, 2 X 2, wire reinforced
1
3 $1.49 ea
1 $9.49 ea
4 $0.99 ea
nut, kep, #10-32 zinc
clamp, hose, 2-1/4 dia
sol hose, 1/2" kuri 100psi
elbow, brass, 90 deg, 1/2" barb x 3/8"mpt
B172
H544
H217
G059
26
PH628-24
27
H273
PH615-26
31
28
32
29
30
C
6
4 $0.99 ea
1 $4.99 ea
1 $3.19 ea
4 $1.99 ea
1 $3.49 ea
5 $0.99 ea
clamp, hose, 5/16-29/32
washer, 11/16"id x 1-1/2"od x .075, s/s
adapter, brass, 1/2" barb x 3/8" fsw, ball end
B160
H347
H299
33
34
35
4 $0.99 ea
1 $8.99 ea
2 $4.49 ea
nipple, brass, 1/4"m, hex
washer, 9/16"id x 1"od, flat, s/s
elbow, brass, 90 deg, 1/4"mpt x 1/4" fpt
elbow, brass, 90 deg, 3/8"mpt x 3/8" fmpt
B186
B103
B107
H212
39
36
37
38
1 $151.99 ea
bushing, brass, 3/8"mpt x 1/4" 1 $3.19 ea
pump, 120psi, demand, 115V
elbow, brass, 90 deg, 1/4" mpt x 1/4" mpt
screw, #10-32 x 1-1/4" phil pan head, zinc
B105
B136
H222
C305
43
41
42
40
B
Part prices are subject to change.Order parts at: www.mytee.com/products/product.php?id=1000DX
1 $9.99 ea
2 $0.99 ea
6 $1.99 ea
4 $0.99 ea
2
1
2
nut, hex, 1/4-20 s/s
bracket, rear, fb/spy
bolt, 1/4-20 x 1-1/4" hex head
H912
H203
44
45
sol tank, speedster
washer, 1/4" lock, s/s
washer, buna 1-1/8" od x 3/16" id
G052
46
washer, nylon, 9/16id x 1-1/16od x .031
P732
H213
H215
H413
47
48
49
50
A
1
1
1
7
qd, brass, 1/4" f
nipple, brass, 1/4" x close
adapter, brass, extender, 1/4" mpt x 1/4" fpt, hex
8
B102
B106
B111
52
53
51
D
C
B
A
1
E
F
1000DX
SHEET 2 OF 2
speedster
REV
DWG. NO.
mytee
PRODUCTS, INC.
858-679-1191
DO NOT SCALE
DRAWING
2
1000DX & 1000DX-200 SPEEDSTER
74
73
71
72
70
68
69
75
76
77
78
TITLE:
DATE
10/12/10
NAME
J. Cash
CHECKED
DRAWN
D
SCALE: 1:7
SIZE
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS PROHIBITED.
1
79
3
60
2
to pump "OUT"
thru B106 (#54)
39
50
61
62
3
52
51
21
5
4
46
6
to female QD
thru B111 (#52)
53
37
47
19
58
9
59
56
35
to pump "OUT"
54
thru B107 (#39)
4
55
67
63
64
65
66
3
4
49
57
48
47
4
46
46
4
5
45
3
to pump "IN"
thru B186 (#36)
3
44
5
6
7
28
27
25
21
8
to female QD
thru AH105-18 (#55)
39
38
29
26
1
30
2
3
43
6
31
42
41
40
36
37
to sol tank filter
35
33
34
thru B216 (#58)
32
10
11
18
15
17
14
4
6
9
5
7
8
6
7
12
19
16
13
20
22
23
24
21
9
6
8
7
1000DX & 1000DX-200 SPEEDSTER
515E515E
Inline Conn.
Green
White
Black
GND
L1
L2
Inline Conn.
Black
Brown
Vacuum Motor 2
13655 Stowe Dr.
Poway, CA
92064
Mytee Products
---1
Inline Conn.
Inline Conn.
Green
White
Black
GND
L1
L2
Inline Conn.
Black
SW-DPST SW-DPST
Yellow
Vacuum Motor 1
1
Revision:
Sheet of
0000 A
Time:
Inline Conn.
Letter
11/30/2010 1:49:31 PM
1000DX
Title
C:\Compaines\GHI\Projects\Mytee Schematics\1000DX\1000DX.SCHDOC
Size: Number:
Date:
File:
Green Green
White
Green
White
GND
L2
L1
Black
BlackBlack
Switch
Pressure
Inline Conn.
Blue
Pressure Pump
C322D 013C013C
E515
SW-DPST
Black Black Black
Inline Conn. Inline Conn.
Black
Green
Black
White
GND
L1
L2
Cord Input Primary
8
1001DX & 1001DX-200 SPEEDSTER
1001DX & 1001DX-200 SPEEDSTER® BACK1001DX & 1001DX-200 SPEEDSTER® FRONT
10
9
8
1. Switch plate
2. 2” Male Cuff-Lynx™
3. Solution lid
4. Female quick disconnect (QD)
5. Front handle
1
2
6. Front cooling fan
7. Bottom handle
8. 5” locking casters
9. Solution tank
10. Recovery lid
11
12
3
4
5
13
14
6
7
11. Recovery tank
12. Push handle
13. Drain valve
14. Dual power cords
16
15. Back vent
16. 12” Rear wheels
15
1001DX & 1001DX-200 SPEEDSTER® ITEMS INCLUDED
H110 Cuff-Lynx™ H141 Cuff-Lynx™
2” Hose Adapter 2” Hose Reducer to 1.5”
H375- Hose Hanger H226 Drain Elbow
(4) screws
1001DX & 1001DX-200 SPEEDSTER® CORDS
Left cord: Powers Vac 2 & Heater 2.
Right cord: Powers Vac 1, Heater 1 & Pump.
Yellow tag
indicates primary
cord.
Plug each power cord into a separate, 20A grounded wall outlet.
Outlets must be on two separate breakers. When the amber
light on the switch plate illuminates, the machine is on separate
circuits (not necessarily 20A circuits). You can identify the primary
cord by the yellow tag.
9
1001DX & 1001DX-200 SPEEDSTER
1001DX & 1001DX-200 SPEEDSTER® VAC/SOL
HOSE CONNECTIONS
Attach one end of a solution hose to a wand or other tool, the other
end to the Speedster’s® front quick disconnect. Attach one end of
a vacuum hose to the tool, the other end to the Speedster’s® CuffLynx™ vacuum hose port.
1001DX & 1001DX-200 SPEEDSTER® SWITCHES
Heater 1Vac 1 Vac 2
Pump Heater 2
“On” switches are located on the plate in front of the machine. To
use vacuums, turn on Vac 1 and Vac 2 switches. To use pump,
turn on Pump switch. To activate heat, turn on Heater switch.
Heater 1 for 1000 watts of heat. Heater 2 for 2000 watts of heat.
1001DX & 1001DX-200 SPEEDSTER
FILL SOLUTION TANK
Lift lid and manually ll the tank.
®
1001DX & 1001DX-200 SPEEDSTER
®
FILTER MAINTENANCE
INTAKE
FILTER
Check and clean solution tank lter daily by twisting off, rinsing
with clean water and replacing.
10
Loading...