Mytee Mytee-Lite II 8020, Mytee-Lite II 8070, Mytee-Lite II A8020, Mytee-Lite II A8070 Parts Manual

MYTEE-LITE II









Extractor

Model Numbers:

8020 cold water

A8020 w/ upholstery tool

8070 w/ Heater

A8070 w/ Heater & upholstery tool

User and Parts Manual

www.mytee.com

MYTEE-LITE II

2

This manual is furnished with each new model. It
provides necessary operation and maintenance
instructions and an illustrated parts list.

Read this manual completely and understand the
machine before operating or servicing it.

Use the illustrated Parts List to order parts. Before
ordering parts or supplies, be sure to have your
machine model number and serial number handy.
Parts and supplies may be ordered by phone or mail
from any authorized parts and service center,
distributor or from any of the manufacturer’s
subsidiaries.

• The machine is operated with reasonable
care.

• The machine is maintained regularly – per
the maintenance instructions provided.

• The machine is maintained with
manufacturer supplied or equivalent parts.

MACHINE DATA

Please fill out at time of installation for future
reference.

Model No. – _____________________________

Install Date – ____________________________

Serial No. – _____________________________

TABLE OF CONTENTS:

SAFETY PRECAUTIONS 3

SAFETY LABELS 4

MACHINE COMPONENTS 5

MACHINE SET UP 5

MACHINE OPERATION 7
PRE-OPERATION 7

WHILE OPERATING 7

DRAINING RECOVERY TANK 8

MACHINE MAINTENANCE 8
DAILY MAINTENANCE 8
WEEKLY MAINTENANCE 8

STORING MACHINE 9

TROUBLESHOOTING 10

SPECIFICATIONS 12

MACHINE DIMENSIONS 12

ELECTRICAL DIAGRAMS DWG 1 of 1

ASSEMBLY PARTS LIST DWG 5 of 5

GROUNDING INSTRUCTIONS 3

www.mytee.com

MYTEE-LITE II

designed to clean carpet and upholstery in an indoor

All operators must read, understand and practice the

en read

Do not pull cord around sharp edges or

electrocution can result. Always unplug machine

cause an explosion or fire. Do not use flammable

malfunction or breakdown, grounding provides a

3

SAFETY PRECAUTIONS

This machine is intended for commercial use. It is

environment and is not constructed for any other
use. Use only recommended cleaning solutions and
accessory tools.

following safety precautions.

The following safety alerts symbols are used
throughout this manual as indicated in their
description:

WARNING: To warn of hazards or unsafe
practices which could result in severe personal
injury or death.

FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.

The following information signal potentially
dangerous conditions to the operator or equipment:

FOR SAFETY:

1. Do not operate machine:

-Unless trained and authorized.

-Unless operator manual has be
and understood.

-In flammable or explosive areas.

-Unless cord is properly grounded.

-With damaged cord or plug.

-If not in proper operating condition.

-In outdoor areas.

-In standing water.

-With the use of an extension cord.

2. Before operating machine:

-Make sure all safety devices are in

place and operate properly.

3. When using machine:

-Do not run machine over cord.

-Do not pull machine by plug or cord.

­corners

-Do not unplug by pulling on cord.

-Do not stretch cord.

-Do not handle plug with wet hands.

-Keep cord away from heated surfaces.

-Report machine damage or faulty
operation immediately to your
distributor.

-Follow mixing and handling

instructions on chemical containers.

4. Before leaving or servicing machine:

-Turn off machine.

-Unplug cord from wall outlet.

5. When servicing machine:

-Unplug cord from wall outlet.

-Avoid moving parts.

-Do not wear loose jackets, shirts, or
sleeves.

-Use manufacturer supplied or
approved replacement parts.

WARNING: Hazardous Voltage. Shock or

before servicing.

WARNING: Flammable materials can

materials in tank(s).

WARNING: Flammable materials or
reactive metals can cause an explosion or fire.
Do not pick up.

GROUNDING INSTRUCTIONS

Machine must be grounded. If it should

path of least resistance for electrical shock. This
machine is equipped with a cord having an
equipment-grounding conductor and grounding
plug. The plug must be plugged into an
appropriate outlet that is properly installed in
accordance with all local code and ordinances.
Do not remove ground pin; if missing, replace
plug before use.

www.mytee.com

SAFETY LABELS

4

explosion or fire. Do not pick up.

The safety labels appear on the machine in
the locations indicated. Replace labels if
they become damaged or cannot be read.

WARNING: Flammable materials can
cause an explosion or fire. Do not use
flammable materials in tank(s). Flammable
materials or reactive metals can cause

MYTEE-LITE II

WARNING LABEL- Located on back.
Label warns operator of safe practices of
equipment – English text.

www.mytee.com