Myron L Ultrapen PT1 User Manual

ULTRAPEN

™

PT1

Conductivity/TDS/Salinity Pen

S

ACCURATE

S

S

Professional Water Analysis

Accuracy of ±1% of READING
±.2% at Calibration Point

Reliable Repeatable Results
KCl, NaCl and 442™ Natural Water Modes
Automatic Temperature Compensation
Autoranging
Waterproof
Powered by 1 N Type battery (included)

PACKAGE CONTENTS:

PT1 Pocket Tester Pen - battery installed•
Scoop•
Pocket Clip•
Holster•
Lanyard•
Operating Instructions•

RELIABLE

SIMPLE

INTRODUCTION

9. Scoop

5. Display

6. LED
Indicator Light

1. Push Button

7. Electrodes

8. Cell

2. Pen Cap

3. Clip

}

4. Battery Indicator

Battery Indicator
Icon Charge States

Full

Low

Depleted

Thank you for purchasing the Myron L ULTRAPEN™ PT1 Conductivity/

TDS/Salinity Pen. This instrument is designed to be extremely accurate,
fast and simple to use in diverse water quality applications. Advanced
features include the ability to select from 3 different solution types that
model the characteristics of the most commonly encountered types
of water; proprietary temperature compensation and TDS conversion
algorithms; highly stable microprocessor-based circuitry; user-intuitive
design; and waterproof housing. A true, one-handed instrument, the PT1
is easy to calibrate and easy to use. To take a measurement, you simply
press a button then dip the pen in solution. Results display in seconds.

FEATURES

1. Push Button — turns instrument on; selects mode and unit

preferences.

2. Pen Cap — provides access to battery for replacement.

3. Clip — holds pen to shirt pocket for secure storage.

4. Battery Indicator — indicates charge left in battery.

5. Display — displays measurements, mode options and battery

indicator.

6. LEDIndicatorLight — indicates when to dip instrument in solution,
when measurement is in progress, and when to remove instrument from
solution.

7. Electrodes — measure electric current of solution.

8. Cell — contains ux eld in dened area for accurate current

measurement.

9. Scoop — contains sample solution for measurement when sampling
from a vertical stream. To use, slide the open end of the scoop over the

bottom of the pen until the neck of the scoop is ush with the top of the cell.
Hold pen with scoop end under stream. Rinse and ll with sample solution

3 times. Fill with solution again, then take measurement. We recommend
you recalibrate the pen using the scoop to retain accuracy of ±1%.