Myron&Davis NV7NAT1 User Manual
http://www.myronanddavis.com
Installation Instructions
Nissan Altima
NV7NAT1
INSTALLATION INSTRUCTIONS AND USE
The Myron & Davis In-Dash Navigation System Includes
a built in DVD player that should not be viewed by the
driver while driving to avoid violation of State and Local
Laws. This product should be installed by a professional
to ensure proper installation and operation.
Myron & Davis is not responsible for any potential accidents,
property damage or bodily harm that might result from improper
installation or operation.
- Read the entire installation instructions prior to performing any work.
- Before installation, check to see that all parts are not damaged or defective.
1 - Ensure all appropriate materials are available
These are some of the common installation items you will need:
- Digital Multi – Meter
- Philips screwdriver set
-Trim Removing tools
- ¼” drive sockets
-Torx or Allen-drive wrenches
-A functional DVD or CD
Myron and Davis Entertainment Systems
Multi-Media Navigation System Installation Guide
NV7NAT1 Rev A
Installation Guide
2- Caution
-Battery
Check the battery to ensure it’s fully charged
NOTE: Some new vehicles batteries are not fully charged and may cause improper
operation
3 - Warning
- Remove the key from the ignition
- Disconnect the negative battery terminal
- Care must be used working with vehicles with airbags to prevent:
- injury
- damage to or malfunction of the airbag system
- work on malfunctioning systems or components must be performed by certied
technicians
4 - Removing the Dash Trim
Use caution when removing dash trim components as not to damage or mar the
surfaces or damage the fasteners
- Inspect all fasteners for damage and replace as necessary.
4 – Removal of the Dash Trim Cont’d.
Step 4 - Remove AC control
Step 1. Remove the trim from below
the radio
knobs
Step 2. Use a panel tool to remove the
A/C vents above the radio.
Step 3. Remove the A/C vents.
NOTE: Do not unplug the air bag light.
Loading...