My Music Group RT02B User Manual

TRUE WIRELESS EARBUDS WITH CHARGING CASE

WHAT IS IN BOX

- Bluetooth Earbuds

- Charging station

- Micro USB cable

TRUE WIRELESS STEREO EARBUDS

RT02B

TWE paring

1. Keep the distance between the device and the Bluetooth Earbuds within 3 feet(for pairing

only)

2. Press and hold the multi-function button on both Earbuds for 3 seconds until you hear prompt

“ Power on”, and see blue lights flashing.

3. Then hear "Pairing" and the blue and red light flash alternately.

NOTE:

1. Factory default setting is RIGHT Earbud as MASTER Earbud. To reset/change MASTER

Earbud, hold multi-function button on BOTH Earbuds for 6 seconds. When blue/red lights

flash quickly, press multi-function button twice on the Earbud you want to set as the

MASTER Earbud.

2. If the TWS crash during using or it need to repair, please put the TWS into charging

case to reset.

4. You will hear 2 chimes to indicate both Earbuds are ready for pairing.

Connect TWE to your device

Active the Bluetooth function on your device to search for “E41” and connect to it. You will hear ”

Device connected” from the Master Earbud (Right Earbud-Factory default setting), and blue lights

flash every 8seconds. It is ready for use.

Play Audio

Right Earbud: Play/Pause by press once

Left Earbud: Next Track by press once

POWER OFF

Option 1: Long press the Multi-function button for 3 seconds, hear ”Power off”, the both Earbuds

will turn off.

Option 2: Put Earbuds into charging case and it will be charged automatically. Both Earbuds will

turn off during charging.

HANDS FREE FUNCTION

Short press the multi-function button to answer an incoming call / end an ongoing call;

Long press the multi-function button to refuse an incoming call

Double press the multi-function button to call the number that last called you

REMARK: 1. The hands free operation only support right earpiece(the master one).

SINGEL EARBUD PAIRING

1. Press and hold the multi-function button for about 6 seconds, until you hear “ Power on” then

“Pairing”, the blue/red lights flash quickly. (the other Earbud should be off during this process.)

2. Active the Bluetooth function on your device to search the “E41” and connect to it.

3. You will hear prompt” Device connected” and blue lights flash every 8seconds. It is ready for

use.

Remark: If no device is connected within 5 minutes after power on, the Earbuds will

automatically turn off to save power. After successful pairing, device will remember each other,

it will be paired automatically next time.