My Music Group LC D960 User Manual

Quick Start Guide

What is in the box

- Bluetooth Speaker

- USB cable for charging

- User manual

■ Bluetooth Instruction(Note: The Bluetooth code is LC-D960 , pair code: 0000)

1. Switch the button to "ON", hear prompt sound, the blue LED light on.

2. Then you hear another prompt sound, the blue and red LED light flash
alternatively and it is in Bluetooth pairing mode. ( If there is no operation within 5
minutes, it will power off automatically.)

3. On your portable device, turn Bluetooth on, search for Bluetooth devices, and
select “LC-D960”.

4. If you are promoted to enter a password to complete pairing, enter 0000.

5. The LC-D960 will connect to your device and the blue LED light on.

6. It is ready for use.

■ Wireless Charging function
Connect to the power supply by micro USB cable, the red LED light on
Put your mobile phone which support wireless charging on the top charging area
It start to be charged and there show battery volume during charging

■ Charging the Battery
Before first use, please charge the Bluetooth speaker.
Plug the provided USB charging cable into the speaker and a powered USB port.
While charging, the LED light is red. Once fully charged, it will turn off.
Charging time: 2hours

Remark: 1. The Bluetooth speaker can be used during charging.

2.The LED flash red quickly and there is prompt sound when it is low battery.

■ Specifications:

Speaker: D40mm (130HZ-20KHZ)
Power output: 3W 4Ω

SNR: ≥90±3dB
Bluetooth version: 4.2
Built-in battery: 500mAh
Play time: 2.5hours
Wireless Charging
Input: DC5V 450mA
Output: DC5V 1A 5W

This equipment is subjected to FCC SDoC fo the wireless charger portion.

Responsible Party: LEED'S WORLD INC
Add:400 HUNT VALLEY ROAD, NEW KENSINGTON, PA 15068 USA
TEL: [phone]
Web:www.leedsworld.com

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help