My Music Group CR02 User Manual

80mm

55mm

CR02

the calling,

during playing

music

Previous / Volume-

Multi-function

button

Next / Volume+

LED light

Instruction steps:

1. Press & hold the multi-function button long until the red and
blue lights flicker alternately and then come to the pairing
mode.

Remark: If the Bluetooth adapter was used before, after
entering the reconnection mode, the Bluetooth adapter will
automatically search the latest connected mobile phone.

2. Start the Bluetooth function in your mobile phone, select
the Bluetooth ID of Bluetooth adapter(called “CR02”) and it
may be prompted for a password (some mobile phone

can be connected directly without entering pairing code),
enter “0000” number, press “Yes” to connect the Bluetooth
adapter.

Remark: The pairing distance between mobile phone & the
Bluetooth adapter should be within 1m.

3. The mobile phone will show the sign of success after it
connects to Bluetooth.

4. You can connect a 3.5mm jack headset to the Bluetooth
Adapter and use it to hear music.

5. Button function:
: In the standby mode, press the button once

“ ” “ ”

to play music, again to pause.

Previous, Volume - / Next, Volume + :
When the adapter is playing music, Long press to
decrease volume, short press to enter previous song. Long
press to increase volume, short press to enter next song.

“ ”

6. When there is a calling, press the button of the
adapter once to receive it.

7. After the calling is over, press the button once to
end it.

8. When there is a call, long press the multi-function button for
2S to refuse it.

9. Press the multi-function button until the red light flickers,
and then the device is powered off.

“ ”

“ ”

“ ”

Recharging battery

Plug micro USB cable into the 5V socket, connect to USB
port of Computer for charging battery, the red indicator
light on and the light will be out after full charged.

Remark: Before the first use, the battery must be fully
charged.

Product’s specifications

1. Supports all Bluetooth player, such as iPad / iPhone /
Bluetooth cell phone, Bluetooth MID, etc…

2. Support hands free talking function

3. Bluetooth version : 2.1

4. Distance available : 10m

5. Rechargeable battery: 125mAh

6. Standby time: 200hours

7. Charging time: 1-2hours

8. Playing time: 4 hours after full charged

9. Product’s size: 52*20*11mm

Bluetooth Adapter

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment. This device complies with Part

15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.