Music bottle with Bluetooth speaker
■ Bluetooth Instruction(Note: The Bluetooth code is B78-G , pair code: 0000)
1. Long press " " for 3seconds to power on, hear prompt sound, the blue LED
light on.
2. Then you hear another prompt sound, the blue and red LED light flash
alternatively and it is in Bluetooth pairing mode. ( If there is no operation within 10
minutes, it will power off automatically.)
3. On your portable device, turn Bluetooth on, search for Bluetooth devices, and
select “B78-G”.
4. If you are promoted to enter a password to complete pairing, enter 0000.
5. The B78-G will connect to your device and the blue LED light on.
6. It is ready for use.
7. Long press “+/-” to increase/decrease volume
Short press”+/-” to next/previous song
Short press" "to play/pause
■ Charging the Battery
Before first use, please charge the Bluetooth speaker.
Plug the provided USB charging cable into the speaker and a powered USB port.
While charging, the LED light is red. Once fully charged, it will turn off.
Charging time: 2hours
Remark: 1. The Bluetooth speaker can be used during charging.
2.The LED flash red quickly and there is prompt sound when it is low battery.
■ Specifications:
Speaker: D40mm (130HZ-20KHZ)
Power output: 5W 4Ω
SNR: ≥90±3dB
Bluetooth version: 4.2
Built-in battery: 800mAh
Play time: 5hours
Material: double wall 304ss+ABS+silicon
Size: D83.2*H281mm
FCCID: QIF-B78-G
NOTE: This equipment has been tested and found to comply with
the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are
designed to provide reasonable protection against harmful
interference in a
residential installation. This equipment generates uses and can
radiate radio
frequency energy and, if not installed and used in accordance with
the instructions,
may cause harmful interference to radio communications. However,
there is no
guarantee that interference will not occur in a particular installation.
If this
equipment does cause harmful interference to radio or television
reception, which
can be determined by turning the equipment off and on, the user is
encouraged to
try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party
responsible for compliance
could void the user's authority to operate the equipment.
Loading...