My Music Group B45 User Manual

75mm

55mm

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a par ticular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment. This device complies with Part

15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

POWER PLAY

BLUETOOTH SPEAKER WITH POWER BANK

WITH STAND FUNCTION

FCC ID：QIFB45

User Manual

正面

What's in box

1* Po wer pla y
1* US B cable
1* Aud io cabl e
1* In struc tion ma nual

Bluetooth Operation

(No te: The d evice i s B45, pa ir code : 0000) :

1.Switch to left to turn on the speaker, the status
indicator will blink blue and beep once, it will
automatically enter pairing mode.

2. To pair, go to Bluetooth settings on your smart phone,
tablet, computer or device and connect to “B45”.

3. Enter “0000” if asked for a pass code. It will show
another tone after pair successfully.

: play /pause, when incoming calls, press once to

answer

 Short press “ / ” to next / previous song
 Long press “ / ” to increase / decrease volume (it

can only work when Bluetooth mode)

Hands free function

Establish Bluetooth connection between your device

and the B45 as described above. To answer and end
an incoming call, press button “ ”

Line in Function

Plug the provided audio cable into the Power play and

then plug into your portable Device.

The blue indicator will light up. It is now ready for use.

USB Cable

LINE IN Cable

Charging your portable device

Plug the USB charging cable that came with your

device into your device.

Connect the USB connector to the Power play's USB

output port, your device will be in charging
successfully, no LED indicator when charging other
device.

正反面双面印刷

Recharging the Power Play

Plug the provided USB charging cable into the power

play and connect to an active computer USB port or a
USB AC adapter that is plugged into an active wall
outlet.

The red indicator will light up when charging and it will

die out after full charged.

Specifications:

Speaker: D40mm *2 (130HZ-20KHZ)
Power output::3W*2 4Ω
SNR: ≥90±3dB

Bluetooth version: 2.1+EDR
Bluetooth effective range: up to 10meters
Lithium battery: 4400mAh
Playing time: 10-15hours
Charging time: 6-7hours
Charging voltage: DC5V
Product size: 148*70*57MM

反面