My Music Group B38 User Manual

80mm

60mm

ALUMINUM
ALLOY

Bluetooth mini speaker

User Manual

B38

What is in the box

-Bluetooth Speaker

-USB cable for charging

-Line in cable

-User manual

Bluetooth Instrucon (Note: The Bluetooth code is B38 ,
pair code: 0000)

1. Switch the buon to “ON” , hear the prompt sound and the blue
light flash, it means it has entered Bluetooth paring status.

2. Starng up the Bluetooth funcon of mobile phone to search for
Bluetooth device. B38, select it and it will be prompted for a
password (Note: some mobile phone can be connected directly
without entering pairing code), enter “0000”, press “Yes” to

connect.

3. The Bluetooth speaker is ready for use.

4. Short press “+/-” to next/previous song (it can only work when
Bluetooth mode), long press”+/-” to increase/decrease volume
Short press “ ” to play/pause music (it can only work when

Bluetooth mode)

5. Hands free funcon: Short press “ ” to answer or hang up

phone call.

Line-in funcon: During Bluetooth playing, connect it to any
device with a 3.5mm interface, it will automacally change
to Line in mode.

LINE IN

USB

(Change)

Charging the Bluetooth speaker:

. Plug the provided micro USB charging cable into the speaker and
an acve computer USB port or a USB AC adapter that is plugged
into an acve wall outlet. The LED light is red color and will be die
out aer full charged.
. Charging me: 2-3 hours

Specificaons:

1. Speaker: D40mm (130HZ-20KHZ)

2.Product size: L65*W65*H43mm

3.SNR: ≥90±3dB

4.Bluetooth version: 2.1+EDR

5.Bluetooth effecve range: up to 10meters

6.Polymer baery: 500mAh

7.Playing me: 3-4 hours

8.Charging voltage: DC5V

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment. This device complies with Part

15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.