My Music Group AF MCB16 Users manual

BLUETOOTH

STEREO SPEAKERS

Model:AF-MCB16
Brand:My Music

FCC ID:QIFAF-MCB16

User Manual

Cover Back Cover

KEY FUNCTION DEFINITION

My Music

BLUETOOTH STEREO

SPEAKERS

www.mymusicgroup.net

1

LED

2

Metal Grill

3

ON/OFF/PAUSE/PLAY

4

ABS

5

AUX

6

USB

7

PREV / VOL-

8

MIC

9

NEXT / VOL+

5

6

2 3 4

7

8 9

1

1 2 3

2. Two Bluetooth speaker work together
Long press “ “ for 2 seconds to power on, hear first prompt tone
and Blue LED light flash, don’t loosen the button until you hear the
second prompt tone and Blue LED light flash 4 times every 1.7seconds,
it means that it has entered two Bluetooth speaker paring status. (You
can do it together or do it one by one.)

After about 10seconds, hear
prompt tone from the two
speakers, meanwhile, LED
light of the two speakers
flash quickly, the two
Bluetooth speakers pairing
successfully.

Start up the Bluetooth function
of your mobile phone to search

Short press to Prev, Long press to Vol-

Short press to Next, Long press to Vol+

Long press 2 seconds to power on, Blue LED flash and hear first
prompt tone

Long press 5 seconds to two Bluetooth speaker pairing status, Blue
LED light flash four times quickly every 1.7seconds and hear
second prompt tone

Long press 8seconds to separate Bluetooth speaker paring status,
Blue LED light flash quickly and hear third prompt tone

Long press 3seconds to power off, hear prompt tone and LED dieout

for Bluetooth device(Pair), select it and it will be prompted for a
password (Note: some mobile phone can be connected directly without
entering pairing code), enter”0000” number, press ”YES” to
connect the Bluetooth device(Pair).

The two Bluetooth speakers are ready for use. One speaker is with
steady blue LED light (vice speaker) and the other one with blue LED
light flash quickly (main speaker).

3. Hands free function
When you listen to music via Bluetooth, if there is incoming call, the

music will be interrupted automatically. Short press “ ” of main
speaker (during two Bluetooth speaker work together) to answer the
call, you can talk and hear clearly from the speaker directly, instead of
from mobile phone. Press twice “ ” to refuse call. The effective
distance between the Bluetooth speaker and your mouth is within
30-50mm.

Functional operation：

1. Separate Bluetooth speaker
Long press “ ” for 2 seconds to power on, hear first prompt tone
and Blue LED light flash, don’t loosen the button until you hear the
third prompt tone and Blue LED light flash quickly,it means that it has
entered Bluetooth paring status.

Start up the Bluetooth function of your mobile phone to search for
Bluetooth device(Pair), select it and it will be prompted for a password

(Note: some mobile phone can be connected directly without entering
pairing code), enter”0000” number, press ”YES” to connect the
Bluetooth device(Pair).

The separate Bluetooth speaker is ready for use.

4. Starting Bluetooth status, the speaker can be standby within 5
minutes, after 10 minutes, the Bluetooth speaker will Power off
automatically and you will hear prompt tone.

5. Line-in function: Connect it to any device with a 3.5mm interface to
play music. Please note: The Answer/End call/Play/Pause buttons on
speaker is workable when Line in, except the Vol+ -, Prev/Next,
which are only work when Bluetooth.

6. Recharging battery:

(1). Confirm the power is off
(2). Plug the provided micro USB charging cable into the speaker and
an active computer USB port. The signal light turns red, and will keep
red when charging. It will die out after full charged.

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including

interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

4 5 6 7