My Music Group AF B19 Users manual

Bluetooth mini

speaker

FCC ID:QIFAF-B19

User Manual

Overview:

Front View Back View

LED Indicator:

Indicator

RED

GREEN

Flashing
BLUE

AUX/
BT

BLUE

Status

Charging

Fully Charged

Pairing Mode

Connected/
AUX IN Mode

LED
Indicators

Micro USB
Power Input/
Line-in

Slide Switch
[On/Off
AUX IN mode;
BT mode]

■ What is in the box:

- Bluetooth Speaker

- Micro USB to USB cable and 3.5mm splitter cable

- User manual

■ Line-in function:

Switch to the AUX IN mode, the blue status indicator will
turn on. Connect Bluetooth speaker and the music device
with the included Micro USB to USB and 3.5mm splitter
cable.

■ Bluetooth Instruction(Note: The device is
B19, pair code: 1234)

1. Making switch to BT mode to make it discoverable and
ready for pairing. The status indicator blinks blue.

2. On your Bluetooth device, turn on Bluetooth and scan for
devices in the Bluetooth menu.

3. Select“B19” when it appears on device list. (If a
pass code is requested, enter 1234). The blue status
indicator stops blinking once pairing is established and is
ready for use.

■ Troubleshooting

1. No connection between Bluetooth speaker and Bluetooth
device.
Make sure the battery is fully charged.
Make sure the Bluetooth speaker is functioning in the BT
mode.
Make sure your Bluetooth device is discoverable.
Make sure your device supports Bluetooth Advance Audio
Distribution.
Make sure both device are within reception range.

■ Charging Bluetooth speaker

1. Plug micro USB tip into the micro USB port on the back of
the Bluetooth speaker

2. Plug USB tip into USB compatible wall charger or USB
port of PC

3. During charging, the red status indicator turn on and it will
becomes green when the Bluetooth speaker is fully
charged. Please disconnect the USB cable.

4. Fully charged time:2-3hours

5. Play time:6-10hours

■ Product’s Specifications

1. Heavy bass

2. Power output: RMS 3W

3. SNR: ≥90±2Db

4. Speakers: D45mm(150HZ-20KHZ)

5. Input Voltage: DC 5V/ 1A

6. Lithium polymer battery input: 1000mAh(DC5V)

7. Dimension: 61*61*54(mm)

8. Material: ABS shell

9. Weight: 133g

FCC Caution.

§ 15.19 Labelling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

§ 15.21 Changes or modification warning

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

§ 15.105 Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between theequipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

* RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirement. The device can be used

in portable exposure condition without restriction.