Mymaga Flux Plus User Manual
User GUide
Índex
1. LIMITATION OF LIABILITY
2. SAFETY INFORMATION
2.1. AC adapter Requirement
2.2. Warning Volume Level Headphones and Earphones
3. WARRANTY
3.1. Warranty Conditions
3.2. Support Conditions (Repair Service)
3.3. Pixel Defect Policy
4. PACKAGE CONTENTS
5. DEVICE OVERVIEW
6. DETACHING YOUR DEVICE
7. CHARGING YOUR MYMAGA
7.1. Battery charge status
7.2. Saving battery power
8. TURN ON YOUR DEVICE
8.1. Turn Off Your Device
8.2. Sleep mode
9. WINDOWS INTERFACE
9.1. Start Screen
9.2. Desktop
9.3. Customizing your taskbar
9.4. The Charms menu
9.5. All Apps
9.6. Start Button
9.7. Start Menu – Power Use Menu
10. SETUP
10.1. Adding an App
10.2. Removing an app
11. CONNECTIVITY OPTIONS
11.1. Enabling wireless connection
11.2. Connecting to a wireless LAN
11.3. Connecting a USB drive
11.4. Disconnecting a USB drive or storage device
11.5. Connecting to a HDMI port
11.6. Connecting a Bluetooth device
12. INSERTING MEMORY CARD
13. SUPPORTED FORMATS
14. HELP AND TROUBLESHOOTING
14.1. Windows help
14.2. Troubleshooting
14.3. Display problems
14.4. Sleep problems
14.5. Keyboard problems
14.6. Sound problems
14.7. Other problems
15. SCIENCE KIT
15.1. Microlens
15.2. Thermal Probe
15.3. Earphones
16. INTEL® EDUCATION SOFTWARE
17. MYMAGA AGENCY REGULATORY NOTICES
17.1. Declaration of Conformity
17.2. Specific Absorption Rate (SAR) Certification Information
17.3. Elimination of Private Equipment by Users in the European Union
4
Before you start using your device, make sure you read
the supplied information that explains how to operate the
equipment. This will ensure that you use your device safely
and correctly.
This User Manual applies to the products FLUXplus and
CLASSplus. You can download it on www.mymaga.eu.
For online Help and support, visit support.mymaga.eu.
Note: Screen displays and illustrations may differ from
those you see on the actual product.
CONGRATULATIONS ON
THE PURCHASE OF YOUR
MYMAGA DEVICE.
5
Limitation of LiabiLity
safety
information
1
2
Despite reasonable efforts made to ensure the accuracy of this manual,
the manufacturer and distributor assume no liability resulting from
errors or omissions in this manual or the use of the information contained
herein.
Please read this important safety information before you use the device.
It contains general safety information for devices and may include
content that does not apply to your device.
Follow the warning and caution information to prevent injury to yourself
or others and to prevent damage to your device.
Caution: Failure to comply with safety warnings and regulations can
cause property damage, serious injury or death.
Make sure you comply with the following safety instructions:
• Care and use your device properly;
• Never dispose of the device in a fire;
• Never place the device on or in heating devices, such as microwave ovens,
stoves, or radiators. The device may explode when overheated. Follow all local
regulations when disposing of used devices;
• Avoid exposing your device to very cold or very hot temperatures. Extreme
temperatures can damage the device and reduce the charging capacity and life
of your device;
• Do not store your device in very hot or very cold areas. It is recommended to use
your device at temperatures from 5 °C to 35 °C;
• Do not use your device or applications for a while if the device is overheated;
• Do not use your device in a hospital, on an aircraft or in an automotive equipment
that can be interfered with by radio frequency;
• Avoid using your device within a 15 cm range of a pacemaker, if possible, as your
device can interfere with the pacemaker. To minimize possible interference with
a pacemaker, use your device only on the side of your body that is opposite the
pacemaker;
• Turn off the device in potentially explosive environments;
6
• Always comply with regulations, instructions and signs in potentially explosive
environments;
• To prevent eye strain, take frequent breaks while using the device;
• Do not use the device if it is cracked or broken;
• Broken glass or acrylic could cause injury to your hands and face;
• If bent or deformed, your device may be damaged or parts may malfunction;
• Do not disassemble, modify, or repair your device. Any changes or modifications
to your device can void your manufacturer’s warranty. If your device needs
servicing, take your device to an approved Service Center;
• Allow only qualified personnel to service your device;
• Allowing unqualified personnel to service your device may result in damage to
your device and will void your manufacturer’s warranty;
• When cleaning your device, mind the following; do not use chemicals or
detergents. Doing so may discolor or corrode the outside the device or may result
in electric shock or fire;
• Do not use the device for anything other than its intended use;
• If your device has a camera flash or light, do not use it close to the eyes of people
or pets. Using a flash close to the eyes may cause temporary loss of vision or
damage to the eyes. Use caution when exposed to flashing lights;
• Protect your personal data and prevent leakage or misuse of sensitive information;
• While using your device, be sure to back up important data. mymaga devices are
not responsible for the loss of any data;
• When disposing of your device, back up all data and then reset your device to
prevent misuse of your personal information;
• Carefully read the permissions screen when downloading applications. Be
particularly cautious with applications that have access to many functions or to a
significant amount of your personal information;
• Check your accounts regularly for unapproved or suspicious use. If you find any
sign of misuse of your personal information, contact your service provider to
delete or change your account information;
• In the event your device is lost or stolen, change the passwords on your accounts
to protect your personal information;
• Avoid using applications from unknown sources and lock your device with a
pattern, password, or PIN;
Do not distribute copyright-protected material without the permission of the content
owners. Doing this may violate copyright laws. The manufacturer is not liable for any
legal issues caused by the user’s illegal use of copyrighted material.
7
2.1. AC ADAPTER REQUIREMENT
2.2. WARNING VOLUME LEVEL HEADPHONES
AND EARPHONES
The AC adapter should match the plug and voltage requirements for your local area.
Regulatory approval has been obtained using the AC adapter for the local area.
Never use a damaged charger, damaged power cords or loose electrical sockets.
Unsecured connections can cause electric shock or fire.
Do not touch the power cord with wet hands or disconnect the charger by pulling the
cord. Doing so may result in electrocution.
Connecting the charger improperly may cause serious damage to the device. Any
damage caused by misuse is not covered by the warranty.
While charging, the device may heat up. This is normal and should not affect the
device’s lifespan or performance. If the battery gets hotter than usual, the charger
may stop charging.
Use only mymaga-approved chargers, batteries, and cables. Generic unapproved
chargers may shorten the life of your device or cause it to malfunction. They may also
result in a fire or cause the battery to explode.
mymaga devices cannot be responsible for the user’s safety when using accessories
or supplies that are not approved by the manufacturer.
Listening to music at high volume levels and for extended periods of time can
damage hearing. To reduce the risk of hearing damage, lower the volume to a safe
and comfortable level and the amount of time listening at high levels.
For your own safety, before using headsets or earphones, always reset the volume.
The sound volume is louder on some headphones, although the volume control
settings are the same.
Changing the default audio or equalizer settings might lead to higher volume and
should be done carefully.
Exposure to loud sounds while walking may distract your attention and cause an
accident.
Do not use a headset while driving or riding. Doing so may distract your attention and
cause an accident or can be illegal depending on your region.
8
Warranty
3
Quality and reliability are constant assumptions during
the creation and the production of our products.
3.1. WARRANTY CONDITIONS
1. Products produced by J. P. Sá Couto, SA (hereafter known as JP-IK), under
mymaga brand, benefit of a product compliance warranty against defects for a
legal period of 24 months from the date of the first purchase (by the consumer),
within the geographical area of warranty.
2. The warranty will only be given upon presentation and validation of the invoice.
The warranty may be refused and the service declined if the aforementioned
document is not presented, incomplete and/or illegible.
The warranty will not take any effect if the product and/or the serial number have
been modified, deleted, removed and/or made illegible.
3. Any technical intervention shall only be carried out by JP-IK authorised technical
services and in accordance with the terms set in the support conditions. The
technical intervention by non-authorized technical services determines forfeiture
of the correspondent warranty.
4. This warranty only covers the product’s hardware components.
This warranty covers the repair or replacement of the faulty product or parts, as
well as the labour force required for the repair, at no cost to the consumer.
In case of replacement, JP-IK reserves its right to replace with new products and
new and/or refurbished parts.
5. Are excluded from this warranty:
Periodic checks, maintenance and repair of parts subject to natural wear and tear;
Damage or malfunctions caused by incorrect installation or misuse, including the
use of the equipment under conditions for which it was not created or produced;
Damage or malfunctions caused by incorrect transportation;
Damage or malfunctions caused by unforeseeable circumstances or force
majeure events (fire, floods, nature phenomena, war, civil disturbances, or any
other outside the control of JP-IK);
9
Damage or malfunctions caused to the power supply or converter by a power
surge (abnormal increase in electric current intensity for a short period of time)
originating in the power grid;
Damage or malfunctions caused by improper ventilation;
Damage or malfunctions caused by technical interventions carried out by persons
or entities not authorised by JP-IK;
Damage or malfunctions caused by virus or any software not originally supplied
with the equipment;
The modifications and/or adjustments to the product required for its use in
countries or places for which it was not originally conceived;
The software installed in the product, whatever it is.
6. JP-IK shall not be held liable:
For any damages or lost profits resulting from the use of the product, or losses
resulting from defects of any nature or justifiable delays in repairs or replacement
of parts;
For “damage in” or “loss of” any programs or data, being expressly excluded any
liability or unceasing or error-free operation guarantee of the software integrated,
pre-installed or supplied with the equipment;
For “damage in” or “loss of” any installed programs and/or data created by the
user, after the purchase of the equipment;
For any incidental or for any situation that results in the forfeiture of the
equipment’s warranty.
7. Where the legislation in force outlaw or limit the previous exclusions and/or
limitations to this warranty, this (the warranty) shall be limited to the extent
permitted by the according legislation in force and due date set in it.
JP-IK’s liability under this warranty shall not exceed, in any case, the price
paid for the product.
8. The consumers have legal rights enshrined in national legislations in force in
respect of consumer goods.
This warranty does not affect legal rights consumers may have, according to
the applicable national legislation, nor those rights that cannot be excluded or
limited, nor the consumer’s rights in relation to the agent from whom the product
was purchased.
9. In the absence of applicable national legislation, this warranty will be the sole and
exclusive consumer protection.
10
3.2. SUPPORT CONDITIONS REPAIR SERVICE
3.3. PIXEL DEFECT POLICY
The execution of the compliance warranty of the products produced by JP-IK, under
mymaga brand, shall be carried out by Service Centers authorized by JP-IK, which
are distributed over the countries to where the products are provided and must be
requested at www.mymaga.eu selecting for this purpose the “support” option or di-
rectly through the retailer from which the product was purchased.
To prepare the equipment for transportation:
1. Make a backup of the information contained in it.
When repairing of your equipment it may be necessary to reformat or replace the
disk. We also recommend the removal of confidential or personal information
before sending any equipment for repair.
IMPORTANT: JP-IK does not held itself responsible for the loss of information
during the repair service.
2. JP-IK cannot ensure the return of removable components.
Remove the memory cards from the equipment before sending it for repair.
3. When sending your equipment, use the original product packaging or other sui-
table packaging to prevent damage during transportation. Make sure the equipment is well packed and protected.
Any information must be requested to:
J. P. Sá Couto, S.A.
Rua da Guarda, 675
4455-466 Perafita - Portugal
e-mail: support@mymaga.eu
All mymaga products pass thru a strict quality and reliability control process. Despite
all the effort in these processes, a small percentage of LCD panels may have minor
cosmetic manufacturing anomalies or irregularities such as bright or dark dots in the
viewable area. These cosmetic imperfections are common to all LCD panel types and
are not specific to any mymaga model or product line.
mymaga products use Class 1 LCD Panels with the following set of criteria when damaged LCDs are submitted for warranty coverage.
11
Class 1 panels permit any or all of the following:
• 1 full bright (“stuck on white”) pixel;
• 1 full dark (“stuck off”) pixel;
• 2 single or double bright or dark sub-pixels;
• 3 to 5 “stuck on” or “stuck off” sub-pixels (depending on the number of each).
Classification based on ISO-9241-302, 303, 305, 307:2008 pixel defects.
PackaGe
contents
4
Quick guide
Stylus Pen
Microlens (when applicable)
Thermal Probe (when applicable)
Adapter
Earphones (when applicable)
1
6
5
4
3
2
1
2
3
4
5
6
12
device
overvieW
5
1
6
7
8
9
10
11
12
13
14
5
4
3
2
Microphone
Sound and speech recording
Front Camera
Self- portraits and video conference
Digital Pen Slot
Place safely the digital Pen
Speakers
Play music and other audio data
Rear Camera
Take photos or record videos
Volume Control
Press to increase or decrease sound volume
Power / Sleep Button
Push to power on/off your tablet. Pushing
while tablet is in sleep mode will resume to
normal operation
Windows Button
Switches between the Start screen and the
previously opened app/program
Combo Jack
Plug a headphone set or the Thermal Probe
(when applicable)
Micro SD Card Slot
Insert a Micro SD memory card
Micro USB Port
Plug in a USB device
Micro HDMI Port
Connect your HDMI external screen
DC-in Jack
Plug the adapter to charge your tablet
Docking Port
Connect your tablet to the dock
Loading...