My Life My Shop Cor1 Instruction Manual

BLOOD PRESSURE MONITOR

Cor1

INSTRUCTION MANUAL

Congratulations

on your My Life My Shop purchase.

The Cor1 Blood Pressure Monitor will

allow you to measure vital blood

pressure parameters wherever you go.

To get the most out of your new

blood pressure monitor and ensure

your safety, please read this

instruction manual prior to use.

Please follow these instructions

carefully, and retain this manual for

future reference.

For assistance,

call 1-888-870-2132 or visit us at

mylifemyshop.com

TABLE OF CONTENTS

Safety Information ............................................. 1

Cor1 LCD Display .............................................. 5

Monitor Components ....................................... 7

Installing Batteries .............................................. 8

Setting Date & Time .......................................... 9

Setting Measurement Unit .............................. 10

Positioning the Cuff ......................................... 11

Measurement Tips ........................................... 12

Taking a Measurement ...................................13

Recalling Records ...........................................14

Deleting Records .............................................15

2 Year Warranty ...............................................16

Maintenance ...................................................17

Systolic & Diastolic Pressure ............................19

Standard Blood Pressure ................................20

Irregular Heartbeat Detector .........................21

Frequently Asked Questions ...........................22

Troubleshooting ............................................... 23

Specifications ..................................................24

Complied Standards .......................................25

EMC Guidance ...............................................25

FCC Statement ................................................26

SAFETY INFORMATION

Symbol Description

The Operation Guide Must be Read

Serial Number

Manufacturer

Direct Current

Manufacture Date

Type B Applied Parts

ENVIRONMENT PROTECTION - Waste electrical
products should not be disposed of with house­hold waste. Please recycle where facilities exist.
Check with your local authority or retailer for
recycling advice.

Read this manual thoroughly

before using your

Cor1 Blood Pressure Monitor

SAFETY INFORMATION

The Cor1 BPM measures systolic and diastolic
blood pressure and pulse rate of an adult by
using a pressurized cuff on the left wrist. The
device is not intended for use on infants and
children. The device is designed for home
use only, and is not intended for ambulatory
measurement - measurement recorded
continuously throughout the day.

Blood pressure measurements determined with
this device are equivalent to those obtained
by a trained observer using the American
National Standard, Manual, Electronic or
automated sphygmomanometers.

If you suffer from a disorder of heart rhythm
(arrhythmia), only use this blood pressure
monitor after consulting with your physician. In
certain oscillometric cases, this measurement
method may produce incorrect readings.

This Cor Measurement device is not intended
to be a diagnostic device. Contact your
physician immediately if pre-hypertensive or
hypertensive values are indicated.

1 2

CAUTION

• This device is not suitable for continuous
monitoring during medical emergencies or
operations.

• If the pressure of the cuff exceeds 40 kPa (300
mmHg), the device will automatically deflate.
Should the cuff not deflate when its pressure
exceeds 40 kPa (300 mmHg), detach the cuff from
the wrist and press START/STOP to stop inflation.

• Do not use the monitor under the conditions of
strong electromagnetic field (e.g. medical radio
frequency equipment) that radiates interference
signal or electrical fast transient/burst signal.

• The device is not AP/APG equipment. It is not
suitable for use in the presence of flammable
gases (avoid oxygen, nitrous oxide).

• Keep the unit out of reach of infants or children.
Inhalation or swallowing of the device’s small
pieces is dangerous or even fatal.

• Use only accessories and detachable parts
specified and authorized by the manufacturer.
Not doing so may cause damage to the unit or
danger to you.

CAUTION

Read this user manual thoroughly before use.
This device is designed and manufactured to
operate within defined design limits. Misuse
may result in harm. The following should be
observed to best use and maintain your
device:

• This device is intended for adult use only.

• This device is intended for non-invasive
measuring and monitoring of arterial blood
pressure. It is not intended for use on body
extremities other than the wrist.

• Its sole function is blood pressure and heart
rate measurement.

• Monitoring blood pressure with this device
does not equate to a medical diagnosis.

• This device allows you to monitor your blood
pressure under the care of a physician.

• If you are taking medication, consult with
your physician to determine the most
appropriate time for your measurement.
Never change a prescribed medication
without your physician’s consent.

!

3 4

COR1 LCD DISPLAY

Symbol Description Explanation

Systolic Blood
Pressure

High Pressure Result

Diastolic Blood
Pressure

Low Pressure Result

BPM Heart Beats per Minute

Memory See Page 14

Movement Error

Results in Inaccurate
Measurement

Low Battery Replace Batteries

kPa

Measurement Unit
1kPa=7.5mmHG

mmHg

Measurement Unit
1mmHg=0.133kPa

Deating Cuff is Deating

Current Time YY:MM::DD, HH:MM

Grade Grade of Blood Pressure

Arrhythmia Irregular Heartbeat

Heartbeat

Heartbeat Detection
During Measurement

Norm.

Hype.

G3

G2

G1

Time/Date

Memory

Pul/min

Hypo.

5 6

Components
Included

1-Cor1 Unit
2-AAA Batteries
1-Instruction Manual

MONITOR COMPONENTS INSTALLING BATTERIES

1. Open the Battery Compartment

2. Insert 2 AAA Batteries, according to the
polarity indicators (+ / -)

3. Close the Battery Compartment

Replace the Batteries Under these Conditions

• displays on the LCD

• The LCD display dims

• When powering the monitor on, the LCD
does not light up

Hypo.

Memory

Memory
Button

Battery
Compartment

Set Button

Systolic

Cuff

(Type B Applied Part)

Diastolic

Start/Stop

Pulse Rate

Grade

Time

LCD

Display

7 8