Mylek MYC01-10A, MYC01-15A, MYC01-20A User Manual

www.mylek.co.uk

1 | Page

LCD Programmable Panel Heater

INSTRUCTION MANUAL FOR MODELS

MYC01-10A, MYC01-15A, MYC01-20A

BEFORE USE:

Please read the instructions carefully. You must inspect the appliance including its

cable and plug for any signs of damage. If the product is damaged, DO NOT USE and

contact your supplier immediately for refund or replacement.

This product is only suitable for well insulated spaces or occasional use.

www.mylek.co.uk

2 | Page

General Information:

Thank you for choosing the Mylek LCD weekly programmable
Panel heater with Open window function. Please take time to
carefully read and understand the entire instruction manual before
using the product and then save it for future reference. We reserve
the right for any errors in text or images and any necessary
changes made to technical data. If you have any questions
concerning operational or technical problems please contact our
Customer Services on 0800 091 3171.

Before Using This Heater:

When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock, and
injury to persons. This includes but is not limited to the
following:

CAUTION:

This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge of the product. The appliance
is to be operated by responsible adults only after reading and
understanding these instructions. Children should be supervised
at all times to ensure that they do not play with the appliance.
Children under 16 years should not operate the unit or carry out
maintenance and/or clean the unit. Any infirmed persons in the
vicinity of the unit should be accompanied by a responsible and
competent able bodied adult. Remove the packing and make sure
that the appliance is intact. If there is any doubt concerning the
integrity of the unit do not use the appliance and contact our
recommended after-sales service. Do not leave any packaging

www.mylek.co.uk

3 | Page

materials within easy reach of children. Before switching on
appliance check if the electrical voltage and frequency of the
circuit correspond to those indicated on the appliance. Use the
appliance only for the stated purpose, namely as a heater for
domestic use. Do not use it for any other application as it could be
dangerous.

Safety Instructions:

• The product is for indoor use only.

• The item should be used only as intended.

• Check item carefully before use. Do not switch on heater with

defects or damaged power cable.

• The appliance should be connected to the same voltage as
shown on the rating label and printed in the manual.

• The heater should only be plugged into grounded sockets.

• Before plugging in the heater, make sure it is switched off.

• Do not use the appliance near flammable liquids or any

flammable materials.

• The appliance must not be located immediately below a socket
outlet.

• If the power cable is damaged in any way, send it to the nearest
after sales service recommended by the manufacturer for
replacement.

• Do not connect the appliance to extension cables or multiple
outlets.

• Do not damage or knot the power cable.

• Before cleaning the appliance or carrying out any maintenance

switch off the heater, unplug from its power source and leave
to cool for 1 hour.

www.mylek.co.uk

4 | Page

• Never expose the appliance to external weather conditions (rain,
sun, etc.)

• The appliance must always be placed on a flat and stable
surface with the feet fitted correctly or fitted correctly to a wall
using the correct fixings.

• If the appliance is not being used switch it off. If any repair is
required please contact the after-sale centers approved by the
manufacturer.

• Do not touch heater with wet hands.

• Always unplug the item, before cleaning or if the item becomes

faulty.

• Never carry the heater by the power cable.

• When you switch off the heater unplug from the power source

by the plug. Do not pull on the cable to unplug from the power
source.

• Do not wrap the cable around the appliance after use.

• Children of less than 3 years should be kept away unless

continuously supervised.

• Children aged from 3 years and less than 8 years shall not plug
in, regulate and clean the appliance or perform user
maintenance.

• CAUTION — Some parts of this product can become very hot
and cause burns. Particular attention has to be given where
children and vulnerable people are present.

• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.

www.mylek.co.uk

5 | Page

• The appliance should only be connected to the same voltage as
printed on the rating label and manual.

• If used as a portable heater do not use in the immediate
surroundings of a bath shower or a swimming pool.

• WA R N IN G : I n o r de r t o a v oi d o v er h ea ti n g, d o n o t c o ve r t h e
heater.

• Never place foreign objects into the air vents.

Installation:

Floor Standing:

• The heater carries an IP22 waterproof rating, If this unit is to be fitted in a bathroom then

it must be “INSTALLED BY A QUALIFIED ELECTRICIAN”.

• The LCD panel heaters can be wall-mounted or floor standing.

• Mount feet on the base of the unit using the 6 screws provided (3 screws per foot) in

accordance with Figure 1 below making sure the screws are securely tightened.

Figure 1

Wall Mounting:

• For wall mounting, carefully remove the already constructed hanging bracket from the rear

of the heater by turning the two plastic securing grips located at the top of the bracket. It is

good practice to remove the bracket and replace a few times so you are familiar on how it
attaches before securing to the wall.

• Using the hanging bracket as a template, place the hanging bracket level against the wall
as a guide ruler (please make sure the holes are parallel level), use a marker pen to mark

the hole position. Image 2 on Figure 2 below.

• Drill holes on the wall with ɸ 8mm drill bit and insert the plastic wall plugs. Image 2 on
Figure 2 below.