MYLAPS TNETX User Manual
Contact Information
MYLAPS EMEA Office MYLAPS Americas Office
Haarlem Atlanta
The Netherlands USA
Tel: +31 23 529 1893 Tel: +1 (678) 816 4000
E-mail: E-mail:
info@mylaps.com info.americas@mylaps.com
MYLAPS Japan Office MYLAPS Asia Pacific Office
Tokyo Sydney
Japan Australia
Tel: +81 3 5275 4600 Tel: +61 (0)2 9546 2606
Email: Email:
info.japan@mylaps.com info.asia.pacific@mylaps.com
www.mylaps.com
All rights reserved
Copyright © 2008-2010 MYLAPS (previously AMB i.t. BV)
This publication has been written with great care. However, the manufacturer cannot be held responsible, either for
any errors occurring in this publication or for their consequences.
The sale of products, services of goods governed under this publication are covered by MYLAPS’s standard Terms and
Conditions of Sales and this product manual is provided solely for informational purposes. This publication is to be
used for the standard model of the product of the type given on the cover page.
MYLAPS Manual: MYLAPS TnetX kit / 05-2010
Contact Information.....................................................................
1 System overview.......................................................................
2 Installation................................................................................
2.1 Installation sequence.......................................................
2.1.1 2-Way Communicator..............................................
2.1.2 2-Way BreakOutBox................................................
2.4 Warning and cautions.......................................................
3 Technical Specifications..............................................................
6 Guarantees & Warranties............................................................
Appendix 1: CE and FCC regulations...............................................
Content
1 System Overview
2 Installation
2.1 Installation sequence
Recommended positions:
1. 2-Way Communicator – in the wheel well or underneath the vehicle
2. 2-Way BreakOutBox – inside the driver compartment
2.1.1 2-Way Communicator
The 2-Way Communicator is the device that receives your official timing and positioning information (based on your
personal transponder).
For optimal communication performance with the timing system, the 2-Way Communicator must be installed
according to the installation requirements.
Installation requirements:
• The 2-Way Communicator should have a clear view to the track;
• The 2-Way Communicator is mounted max. 30cm (1ft) from the track;
• The 2-Way Communicator should not be installed within 30cm (1ft) of your Personal Transponder;
• Maximum operating temperature should not exceed 50°C/122F;
• No electrical wires or electrical devices within 10cm (4 in) to the 2-Way Communicator;
• No carbon fiber around the 2-Way Communicator.
Loading...