MyGica U800 User Manual

U800

HDMI Capture Device

User Manual

www.mygica.com

1

MyGica U800 Quick Start Guide

Thank you for purchasing MyGica U800 product. The following will guide you through how to set

up this device. Hope this device will bring you nice digital experience.

With MyGica U800, just plug to your PC (Windows, Mac, Linux), there is no need to install driver. You
can use any 3

rd

party software to capture or stream your HD game or other HD video source.

1. USB3.0 Type‐A port: To connect to computer with USB3.0 cable.

2. HDMI input port: Connect video source with HDMI cable.

3. HDMI output port: Connect TV with HDMI cable.

For Windows

First, set the audio capture sample rate to 48KHZ:
Note: This is an important settings, otherwise will caused bad audio quality.

2

1) After connect the device to computer, right click on “Speaker” icon on Desktop and
choose ”Recording devices”

2) Double click on Digital Audio Interface “FHD Webcamera”, and then select the “Advanced” menu.
Change the sample rate to “2 channel 16 bit, 48000 Hz (DVD Quality)”

3) If you need to adjust the input audio volume level or if there is no audio input, select “Levels”
menu and set the volume l evel and check the icon behind the value to see if the audio is mute or not.
(You can change it by clicking on it)