MyGica ATV400 User Manual

Android TV Box

ENJOY TV DUAL CORE
ATV400

User Manual

Thank you for purchasing this MyGica product.
.Before using it, be sure to read the precautions contained in this User’s Guide.
.Keep the User’s Guide in a safe place for future reference.
.For the most up-to-date information about this product, visit official website at
http://www.mygica.com

1. Safety Information

Read and understand all instructions before using this product. If damage is caused by
failure to follow the instructions, the warranty does not apply.

1.1 Warning

To reduce the risk of electric shock, DO NOT remove the cover (or back).
DO NOT attempt to repair the product, this could lead to the risk of injury, damage to the
product .
To reduce the risk of fire or electric shock, keep this product away from exposed direct
sunlight, naked flames or heat, large amounts of moisture, dust, and sand.

FCC Note (for U.S.A)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordan ce with the instructions, may cause harmful inter ference to radio or
television reception, which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following
measures.

- Reorient or relocate the receiving an tenna.

- Increase the separation between the equipment and receiver.

- Consult the dealer or an experienced radio/TV technician for help.

- This class B digital product meets all requirements of the Canadian Interference - Causing
Equipment Regulations.

1.2 Precautions

Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for future reference.

1.2.1 Read these instructions.

1.2.2 Keep these instructions.

1

1.2.3 Read all warnings.

1.2.4 Follow all instructions.

1.2.5 DO NOT use this apparatus near water.

1.2.6 DO NOT clean with any chemical detergent. Clean only with a dry cloth.

1.2.7 DO NOT block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

1.2.8 DO NOT install near any heat sources such as radiators, heat registers, stoves, or
other apparatus that produce heat.

1.2.9 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where it exits the apparatus.

1.2.10 Only use attachments/accessories specified by the manufacturer.

1.2.11 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used , use caution when moving the
cart/apparatus combination to avoid injury from tip-over.

1.2.12 Unplug this apparatus during lightning storms or when unused for long period of
time.

1.2.13 Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as when the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.

1.3 Handling Cautions

1.3.1 DO NOT expose this apparatus to dripping or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.

1.3.2 To turn this apparatus off completely, you must pull the power plug out of the wall
socket. Consequently, the power plug must be easily and readily accessible at all times.

1.3.3 DO NOT plug multiple electric devices into the same wall socket. Overloading a socket
can cause it to overheat, resulting in a fire.

1.3.4 Before connecting other com ponents to this player, be sure to turn them of f.

1.3.5 If the product makes an abnormal noise or produces a burning smell or smoke, turn
off the power switch immediately and disconnect the power plug from the wall outlet. Then,
contact the nearest customer service center for technical assistance. Do not use the
product. Using the product as it is may cause a fire or an electric shock.

2

2. Introduction

2.1 Package Contents

Enjoy TV Dual Core - ATV400

HDMI Cable

Quick installation Guide

Power Adapter, Input: AC100 ~ 240V, 50/60Hz, Output: 5V/2A

IR Remote Controller (IR RC)

2.2 Product Features

 Dual Core ARM Cortex A9, 1.5GHz, RAM 1G, built in 2G-32G flash memory

 Powered by Android 4.2 OS

 Built in 802.11b/g/n WI-FI module, wireless Internet access

 2 USB interface, support mobile HDD, wired/wireless mouse and keyboard operation

 RJ45 10/100M Ethernet interface

 Support 1080P video playback

 HDMI video output, connect to HDTV for HD video playback

 Support weather, calendar, and desktop clock gadgets

 Support 2.4G wireless motion Remote Controller

 Support Flash Player 10.2 for hardware decoding, Flash 11.1 for software

decoding ,playback online video

 Support music player, picture player and more family entertainment

 Support Micro SD card and Google Chrome browser and virtual private network access

 App Installer for application installation from USB/Micro SD card

3

2.3 Panel Introduction

2.4 Remote Controller

Remote control KR34

4

[01] Power [02] Mouse [03] Mute

[04] Up [05] Left

[07] Down

[08] Enter [09] Exit

[10] Home [11] Switch

[13] Volume + [14] Notifications

[16] Volume -

Note: Click “Mouse”button once.. Push up/down/left/right to shift the cursor of the mouse .
The remote changes to a mo use

Click “Mouse”again.. The remote ch anges back to no rmal IR remote

[17] Page down

[06] Right

[12] Menu

[15] Page up

2.5 Setup Connection

Place ATV400 on a flat platform near the TV, and make sure nothing blocks the remote
control signal.

5

2.6 Display when Power Up

2.6.1 After power up, the TV will first show a green robot then change to “android” logo during
loading. When loading is finished, it will go to Home screen.

2.6.2 Home Screen display.

6

3. Settings

Using Navigation (4 directions), OK, EXIT, and Menu keys of Remote Controller to select the
options, the option selected will be highlighted and confirmed by pressing OK key. Same
operation for text input if needed.

Select setting icon then press OK key.

3.1 Wi-Fi

3.1.1 It will automatically scan ambient Wi-Fi networks when select “ON”.

3.1.2 Connect an available Wi-Fi network. If connect a secured Wi-Fi network,
corresponding passwo rd will be input firstly. Or fail to connect and need reset password.

3.1.3 Once build up the connection with a certain Wi-Fi network successfully, ATV1200 will
connect this Wi-Fi network automatically when restart.
Note: If factory reset, the password of Wi-Fi network have to be reset.

7

3.2 Ethernet

Connect Box and Router by RJ45 network cable.
Press “ON” in Ethernet setting, it will connect to network automatically.

3.3 Date usage

Show data usage information.

8

3.4 More...

3.4.1 VPN
Build and set VPN

9