Mygeeni OUTLET User Manual
SMART WI-FI
OUTLET
START GUIDE
Thank you for purchasing your Geeni smart home product.
Ready to get started? Download the Geeni app to manage
your CURRENT (and all other Geeni devices) straight from your
phone or tablet. Easily connect to your home Wi-Fi and control
multiple devices with the touch of your fingertips.
CAUTION:
• Use only copper wire
• Do not operate with the faceplate removed
• This product should only be installed by a qualified electrician and in compliance with
local and national electrical codes.
• Indoor use only.
WARNING: RISK OF ELECTRIC SHOCK OR FIRE. Please follow all safety instruction before
installing, servicing, or removing your CURRENT.
Contents
Download & Register 2-4
Install 5-8
Reset & Restart 9
Connect (Easy Mode) 10-11
Connect (AP Mode) 12-13
FAQ, Troubleshooting, Notices 14-17
What’s in the Box
SMART WI-FI
A
LIGHT
SWITCH
START GUIDE
• Smart Wi-Fi Outlet
• Face Plate
B
• 2 x Screws for Outlet
• 2 x Screws for Faceplate
• Start Guide
• Voice Control Guide
VOICE
CONTROL
GUIDE
Get Ready
• Turn OFF AC Power at the circuit breaker or fuse. Use
a noncontact voltage tester to ensure that power is off.
More than one disconnect switch may be required to
turn off power.
• Use Copper Conductors Only
1 Download the Geeni app
2 Register a Geeni account
Enter your mobile phone number
STEP 1
or email address.
STEP 2
Enter the verification code
and create a password.
32
3 Install2 Register a Geeni account, cont.
STEP 3
Log into the app.
STEP 1
Shut off power at the circuit
breaker for the outlet that you
are replacing. More than one
disconnection may be required to
turn off power. Use a noncontact
voltage tester to ensure that
power is off.
OFF
ON
STEP 2
Remove old outlet by disconnecting
all wires.
Disconnect all wires.
54
Loading...