MyFlyDream TeleFlyPro User Manual

MyFlyDream

TeleFlyPro

V1.0

www.MyFlyDream.com

Notes

Thank you for purchasing the MyFlyDream TeleFlyPro (hereinafter referred to as

TFPro).

 Please follow this manual to get familiar with the TFPro and to operate it correctly.
 The TFPro is designed for use with RC-models only. Please use it in compliance

with applicable local laws. The reliability and accuracy of the tracking system

depend on a number of factors. A strong electromagnetic interference, strong

winds, bad GPS status and other reasons may cause a bad result. Please consider

the risk and take it yourself. Any loss or damage caused by the AP system is not our

responsibility.

 We reserve the right to continuously improve the product performance, so this

document may be not in full compliance with the TFPro you purchased. The latest

version of this document will be available at our website:

www.MyFlyDream.com

1. Hardware and features

ID

Name

A

MyFlyDream TeleFlyPro

B

Cables for Camera and VideoTX

C

SetHome switch

MFD TeleFlyPro is an enhance unit for MFD AAT(AutoAntennaTracker) system.

The main function of TeleFlyPro is to modulate the tracking data into Video and Audio signals.

These video and audio signals can be transmitted via a common Video-TX /RX module. With

a V5.0 or newer AATDriver, the AAT system is able to demodulate the tracking data from the

video or audio signal and use it to track the plane.

TFPro’s advanced features include:

1) Modulating tracking data both into video and audio signals. It’s more reliable and works

with most VTX/RX without audio channel compatible issues.

2) TFPro has advanced ,pixel-level black/white OSD function. OSD can be disable if it’s not

used.

3) TFPro uses a barometer to measure the altitude instead of GPS. The tracker now tracks

more accurately than before.

4) An optional 100Amp current sensor is available if user needs to measure the

current/voltage of the power system of the plane.