Welcome to the world
of Independence!
We hope you will enjoy using your myFC PowerTrekk 2.0
Charger! In this guide, the myFC PowerTrekk 2.0 Charger
is simply called the Charger.
The Charger is a portable, self-contained charger that
uses Fuel cell technology and an internal battery to
charge devices.
The Fuel cell produces electrical power using hydrogen
created with a combination of ordinary water and a
special salt held in a container, the myFC Puck.
The Charger can power a device via the Fuel cell and
with the built-in battery pack, or charge the battery via
the Fuel cell.
This guide provides the basic information you
need to start charging your devices with the
myFC PowerTrekk 2.0.
Go to www.powertrekk.com for more detailed
information including FAQ and instruction videos.
2
Follow the instructions for first-time use on page 6–7
The first time you use the Charger, you must follow the
specific start-up procedures described on page 6–7.
After that, the instructions on pages 8 through 11 explain
how you use your Charger on a regular basis. Also make
sure to have read pages 12 through 15 that contain
important information.
Never use a myFC Puck more than once
NEVER try to use a myFC Puck more than once. Even if
you think that it is not fully depleted, do not try this.
Don’t remove Puck before it is depleted
Once the myFC Puck is started, DO NOT remove
the Puck before the Puck is depleted and the Charger
has been turned off.
Contents of the box
Inside the box you will find the following items:
Read this first
myFC micro
USB cable
Storage
Tube
Quick
Start Guide
myFC POWERTREKK™ 2.0
myFC Puck
(selected markets only)
Overview of the Charger
Before you start to use your Charger, familiarize yourself
with all its components.
myFC PowerTrekk Charger
Engine
(contains Fuel cell and battery)
Control panel
Micro USB input port
USB output port
Latch
Tray
4