Myers Power Products CTFRP9003, CTFRP9006, CTFRP9015, CTFRP9018 User Manual

CTFRP Series Power Supplies
User Manual
Myers Power Products 6/2013 CTFRP Series Manual
Chapter 1 General Information
The Myers CTFRP Series Powe r Supply provides a stable non-standby power source for broadband cable operations.
Important Safety Instructions – Save These Instructions
This Safety Guide contains important instructions that should be followed during installation and maintenance of the Myers equipment and batteries. It is intended for Myers customers who setup, install, relocate, or maintain Myers equipment.
Changes and modifications to this unit not expressly approved by Myers Power Products could void the warranty.
Failure to observe these warnings may result in serious injur y, death or damage to the equipment.
ELECTRICAL
W
ARNINGS
BATTERY
W
ARNINGS
OVERHEAD W
ARNINGS
Do not work alone under hazardous conditions.
Do not handle any metallic connector before the power has been
disconnected.
Servicing this equipment may require working with protective covers
removed and utility power connected. Use extreme caution during these procedures.
High current through conductive materials could cause severe burns.
When grounding cannot be verified, disconnect the equipment from the
utility power outlet before installing or connecting to other equipment. Reconnect the power cord only after all connections are made.
Check that the power cord(s), plug(s), and sockets are in good condition.
Replacement of fuses or other parts must be with identical types and ratings.
Substitution of nonidentical parts may cause safety and fire hazards.
Danger of explosion if battery is incorrectly connected or replaced. Replace batteries with same or equivalent type recommended by the manufacturer.
Never stand below anything while it is being hoisted. Always wear a hard hat.
LIFTING
WARNINGS
Transformer modules are heavy. Use proper lifting techniques and equipment to avoid injury.
CTFRP Series Manual Page 1 6/2013
Loading...
+ 6 hidden pages