MWT-FM
FM Single Channel Transmitter
Operation Manual
man_mwtfmV4
www.myeclubtv.com
CONTENTS
FCC COMPLIANCE STATEMENT………………………. 3
INDUSTRY CANADA COMPLIANCE…………………… 3
MWT-FM ORIENTATION…………………………………. 4
SAFETY PRECAUTIONS………………………………… 5
FINDING FM RADIO FREQUENCIES……………......... 5
SETTING THE TRANSMITTER CHANNEL……………. 5
LOCKING THE FREQUENCY SELECTOR……………. 6
CONNECTING THE TRANSMITTER…………………… 6
SPECIFICATIONS…………………………………………. 7
MWT-FM MOUNTING BRACKET……………………..… 8
WARRANTY…………………………………………….….. 9
2
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been verified to comply with the limits for a Class B computing device, pursuant to
the FCC Rules. Operation with non-approved equipment is likely to result in interference to radio and
TV reception. The user is cautioned that changed and modifications made to the equipment without the
approval of the manufacturer could void the user’s authority to operate this equipment.
INDUSTRY CANADA COMPLIANCE STATEMENT
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
MYE Entertainment
25129 The Old Road
Suite 305
Stevenson Ranch, Ca. 91381
3