mychway SR-9902 User Manual

SR-9902 USER MANUAL

I Beofre Operation

1 Please connect the USB charging line with the charging hole of the charging stand, then please

make the charging stand connect with the power supply

2 The indication ED of charging stand will be red if connection is well,please make the main

device Insert into the charging socket,the LCD of the main device will be off after full, 3 hours

needed to be charged each time

3 Clean skin and put some essential on skin

II Operation

4 Take the main device, press “POWER” ,the 9 LEDs of LED pannel will be on, default electrical

level will be 1 level

5 There is 1-5 electrical levels, bigger number, more stronger electric levels

6 How to set electrical levels

Press “POWER” one time, 1 level (default)

Press "POWER” double, 2 level

Press "POWER” three times,s 3 level

Press "POWER” four times, 4 level

Press "POWER” five times, 5 level

6 Please move the device on skin from down to up, inner to outside, you will feel some warm on

skin, it is more better to use some essential with this device, 2 times/week recommendation

III How to use LED function

Mode1

Press LED SEL. ,Red light

Mode2

Press LED SEL twice, Green light

Mode3

Press LED SEL three times,, Blue light

Mode4

Press LED SEL four times, Yellow light

Mode5

Press LED SEL five times, Pink light

Mode6

Press LED SEL six times, Pink light flash

IV Parameters

Output voltage: DC5V

Charging time:3 hours

Power of charging:2.5W

Consumption:MAX 10W

Standby time: 40 days

Capacity of battery: 850mAh

Working duration: 10 minutes

N.W:80g

Size: 165*45*46mm

Package size: 200*152*85mm