myCharge RFAM-0700 User Manual
myCharge name and logo are registered trademarks of RFA Brands.
©2012-2013 RFA Brands. All Rights Reserved. Patent Pending.
Made in China. IB-RFAM0230
Owner's Manual
For latest instructions please go to
www.mycharge.com/instructions
Thank you for
choosing myCharge
Amp 2000
2 3
™
Thanks for choosing myCharge.
Visit mycharge.com/videos/AMP to view
the product demo video!
4. Unplug your device when it's charged, and go! Your
AMP 2000 will automatically power off after your device
is unplugged.
In The Box
• myCharge AMP 2000
™
• Micro-USB charging cable
• Owner’s manual
Power and battery
level check button
USB-A Port
Micro-USB Input
Section I: Quick Start
1. Charge up your AMP 2000 with the included USB to
Micro-USB cord through your computer or USB AC
power adapter.
2. As AMP 2000 charges, the battery icon will ash the color
of the battery level. When the unit is fully charged, the
battery icon will turn solid green. Press the level check
button to see how much power is available.
3. AMP 2000 comes equipped with one built-in USB port for
use with your own charging cable. You must press and
hold the AMP power button for 3 seconds to begin
charging if the AMP is not already turned on.
4 5
Charge from
your computer
Section II: Charging AMP 2000
Connect the included USB to Micro-USB cord through your
computer’s USB port or a USB AC power adapter. Times to
charge the AMP 2000 vary based on what it’s plugged into.
You can expect a full charge from a USB AC power adapter
in about 2.5 hours or from a standard USB port in about
4.5 hours.
As your AMP 2000 charges, the battery icon will ash
according to the energy level:
Solid Green: 100%
Flashing Green: 71–99%
Flashing Yellow: 41–70%
Flashing Red: 0–40%
Note: It is normal for your AMP 2000 to be warm to the
touch while in use.
Loading...