myCharge MYC-0902-1RM User Manual
myCharge name and logo are registered trademarks of RFA Brands.
©2012-2013 RFA Brands. All Rights Reserved. Patent Pending.
Made in China. IB-MC09001RM
Owner's Manual
For latest instructions please go to
www.mycharge.com/instructions
Thank you for
choosing myCharge
Universal Charger 6000™
2 3
Thanks for choosing myCharge.
In The Box
• myCharge Universal Charger 6000
• Charging cable with included tips
- Apple 30-pin (1.0A)
- Apple 30-pin (2.1A) — for charging iPads
- Micro-USB — also charges your myCharge
- Mini-USB
• Carrying pouch
• Owner's manual
Power and battery
level check button
Section I: Quick Start
1. Charge up your Universal Charger 6000 with the included
USB to Micro-USB cord through your computer or USB AC
power adapter.
2. As Universal Charger 6000 charges, the battery icon will
ash the color of the battery level. When the unit is fully
charged, the battery icon will turn solid green. Press the
level check button to see how much power is available.
1.0A USB-A Port
2.1A USB-A Port
Micro-USB Input
3. Universal Charger 6000 comes equipped with two built-in
USB ports and a charging cable with the following tips:
Apple 30-pin, Micro-USB, and Mini-USB. You can also use
your own cable(s) to charge other devices through the USB
ports. Connect your device to one of the ports available.
You must press and hold the Universal Charger's power
button for 3 seconds to begin charging if the unit is not
already turned on.
4. Unplug your device when it's charged, and go! Your
Universal Charger 6000 will automatically power off after
your devices are unplugged.
Section II: Charging Universal Charger 6000
Charge from your computer.
Connect the included charging cable with the Micro-USB
tip through your computer's USB port or a USB AC power
adapter. Times to charge the Universal Charger 6000 vary
based on what it's plugged into. You can expect a full
charge from a USB AC power adapter in about 7.5 hours or
from a standard USB port in about 13.5 hours.
4 5
Loading...