MyCableMart LP-E06 User Manual

USER’S MANUAL

Bluetooth v3 Stereo Multi-function Headphone

with FM-Stereo Radio / Wired Headphone

Microphone / MicroSD Slot / MP3 Player

(1) Product Control and Connector Locations:

1- LED indicator

2- Multi-function button (power on / off, pairing, play / pause, auto

search radio)

3- Volume down (Long Press) / Last song (Short Press)

4- Volume up (Long Press)/Next song (Short Press)

5- MP3/FM

6- answer/end calls, reject call, last number redial

7- Micro SD/TF card slot

8- Micro USB charging port

9- Headset jack

10- Microphone

11- 3.5 stereo sound supply extension line (3ft, male to male)

12- Micro-B USB charging cable

(2) Powering the headset

• Power On: Press the mult-ifunction button for 2-3 seconds until the blue

indicator light flashes (the headset says: “The blue-tooth is ready to pair”).

• Power Off: Press the multi-function button for 2-3 seconds until the blue

indicator light goes off (the headset says: “The blue-tooth is powered off”).

(3) Pair to your mobile phone or other products

• Press the multi-function button for 2-3 seconds until the indicator light starts

flashing red and blue alternatively (the headset says: “The blue-tooth is ready to

pair”).

• Turn on the blue-tooth function of your connecting smart phone (or other

device).

• Search for the blue-tooth devices and select ’LH-811’. (Enter the code ‘0000’ if

prompted)

• If paring is successful, the blue light indicator flashes (the headset says: “The

blue-tooth is connected successfully”).

• IMPORTANT: Please make sure the headphone is off before starting pairing

process.

• Headset will connect to the pre-set phone automatically when turned on (Please

check to be sure the blue-tooth functionality of your phone is “on”)

• If the pairing is not successful, please switch off headset first, and then attempt

to re-pair