Instruction Manual
Provided By
http://www.MyBinding.com
http://www.MyBindingBlog.com
Akiles WBM-532
Wire Binding
Machine
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW WBM - 532, A PROFESSIONAL AND HEAVYDUTY WIRE BINDING MODULE. YOUR WBM - 532 WAS DESIGNED WITH A FULL RANGE OF FUNCTION
AND PREMIUM QUALITY COMPONENTS TO GUARANTEE YOU AN EFFORTLESS AND PROFESSIONAL BIND,
AS WELL AS MANY YEARS OF TROUBLE-FREE SERVICE.
WE RECOMMEND THAT YOU TAKE A FEW MINUTES TO FAMILIARIZE YOURSELF WITH THE FUNCTIONS OF
YOUR NEW WBM - 532. YOU WILL FIND THAT WITH JUST A LITTLE PRACTICE, ANY PERSON CAN
ACHIEVE PROFESSIONAL RESULTS.
F E AT U R E S
INTRODUCTION
O P E R AT I O N A L M A N U A L
IMPORTANT
A S S E M B LY & S A F E T Y I N S T R U C T I O N
( WIRE BINDING MODULE )
1. Place your new WBM - 532 on top of a sturdy working table. See picture 1
2.. Connect the Closing Handle in a vertical position onto the Closing Axle. Tighten the screws counter
clockwise. See picture 2.
2.
1.
Insert a full unbound
document into Diameter Scale.
1. Based on Diameter Scale
reading, on the Master
Selector you will determine
-- Wire Closure
-- Wire Size
Wire Closer Control
Wire Holder
Diameter Scale
Wire Closer
MASTER SELECTOR
Wire Size
Wire Closure
Closer Handle
Closer
Support Bracket
3.
Caution!
Do not touch
3. Caution! Do not touch Wire
Closer while operation as it
may hurt your hands.
2. Set Wire Closer Control
to the wire closure size
determined from Step 1.
3. ( If needed ) Use Master
Selector to identify the size
of your wire.
2.
1-1/4"
1"
7/8"
3/4"
58"/
6
9/1"
/21"
7/16"
38"/
6
5/1"
1/4"
3/6"
1
3.
1-1/4"
1"
"
7/
8
3 4"/
5 8"
/
2:1
:3 1
1.
-4
11/"
1"
7/"
8
3/4"
5/"
8
16
9/"
1/2"
7/16"
3"/8
165/"
4
1/"
3/16"
S E T - U P
1-1/4"
1"
78/"
34/"
58/"
9/16"
/2"
1
7/16"
3/8"
/516"
1/4"
3/16"
W B M - 5 3 2
1. Insert pre-selected wire
into Wire Holder.
2. Insert document from
last pages to first
pages then insert front
cover.
The back cover should
be inserted last with
inside facing up.
3. Take out inserted
document from
Wire Holder to close
the wire.
The seam of closed wire should be inside the book.
Follow step No.2 instruction for best results.
TIPS
Last Page
Back Cover
Back Cover
Front Cover
Front Cover
1. Put inserted document
into Wire Closer.
The wire element must
stand horizontally at
the bottom of Wire Closer.
2. Pull Closer Handle
forward to close.
3. Take out document
and turn back cover
over. The binding is
complete.
OK
The seam of closed wire should be just touching.
Slightly adjust the Closer Control a little left or
right for the under-closed or over- closed seam.
TIPS
PAGE 4
1.
WA R R A N T Y PO L I C Y
YOUR WBM - 532 HAS A WARRANTY OF ONE YEAR FROM DATE OF PURCHASE. IN THE EVENT OF
A MANUFACTURER'S DEFECT, YOUR DISTRIBUTOR (AT OPTION) WILL REPAIR OR REPLACE IT.
IMPORTANT: THIS WARRANTY DOES NOT COVER DAMAGES DUE TO IMPROPER USE OR MISS
TREATMENT OF THE UNIT, INCLUDING ANY EXTRAORDINARY EVENT LEADING TO THE DAMAGE OF
THE MACHINE, WHETHER IT IS REVERSIBLE OR NOT.
IF THE WBM - 532 IS NOT WORKING PROPERLY, FIRST FOLLOW THE CORRECTIVE ACTIONS
ABOVE. IF THE PROBLEM PERSISTS, PLEASE CONTACT YOUR DEALER FOR FURTHER
INSTRUCTIONS. PLEASE HAVE YOUR MACHINE'S SERIAL NUMBER AND THE PURCHASE DATE READY.
IF THE MACHINE MUST BE RETURNED TO YOUR DISTRIBUTOR, IT IS YOUR RESPONSIBILITY TO
PROPERLY PACK AND SHIP IT. AS ANY DAMAGE INCURRED DURING ITS TRANSPORTATION IS NOT
COVERED BY OUR WARRANTY POLICY.
PA
GE 4
2.
3.
1.
2
O
9
I
- 0
0
S
O
T
P
R
E
C
J
o t Fr n
Cover
Back
Cover
B ca k Cover
I N S E R T I N G
C L O S I N G
2.
3.
Loading...