Instruction Manual
Provided By
http://www.MyBinding.com
http://www.MyBindingBlog.com
AKILES
RUBICOIL
INTRODUCTION
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW , A MODERN, PRACTICALAND RELIABLE
PUNCH AND BINDING EQUIPMENT. YOUR WAS DESIGNED WITH PREMIUM QUALITY COMPONENTS
TO GUARANTEEAN EFFORTLESS AND EASY BIND, AS WELL AS MANY YEARS OFTROUBLE- FREE SERVICE.
IMPORT ANT
WE RECOMMEND THAT YOU TAKEA FEW MINUTES TO F AMILIARIZE YOURSELF WITH THE FUNCTIONS OF
YOUR NEW . YOU WILL FIND OUT THAT WITH JUST A LITTLE PRACTICE, ANYONE CAN ACHIEVE
PROFESSIONAL RESULTS.
FEA TURES
OPERATION MANUAL
WARRANTY
YOUR HAS A WARRANTY OF ONE YEAR, FROM ITS PURCHASE DATE. IN THE EVENT OFA
MANUFACTURER DEFECT, YOUR DISTRIBUTOR (AT OPTION) WILL REPAIR OR REPLACE IT. IMPORTANT:
THIS WARRANTY DOES NOT COVER DAMAGES DUE TO IMPROPER USE OR MISTREATMENT OF THE
UNIT, INCLUDING ANY EXTRAORDINARY EVENT LEADING TO THE DAMAGE OF THE MACHINE, WHETHER IT
IS REVERSIBLE OR NOT.
IF THE IS NOT OPERATING PROPERLY, FIRST FOLLOW THE CORRECTIVE ACTIONS IF
THE PROBLEM PERSISTS, PLEASE CONTACT YOUR DEALER FOR FURTHER INSTRUCTIONS. PLEASE HAVE
YOUR MACHINE SERIAL NUMBER AND THE PURCHASE DATE READY. IF THE MACHINE MUST BE
RETURNED TO YOUR DISTRIBUTOR, IT IS YOUR RESPONSIBILITY TO PROPERLY PACK AND SHIP IT,AS
ANY DAMAGE INCURRED DURING ITS TRANSPORTATION IS NOT COVERED BY OUR WARRANTY POLICY.
PROVIDED.
I
S
'
S
'
S
Sheet
ASSEMBLY
Your comes fully assembled. Simply place it
on top of a sturdy work table and you are ready to work.
PUNCHING
1. Move (align) Side Margin Guide to proper sheet & cover
size.
2. Insert sheets and pull handle forward to punch.
3. Return Punch handle to its upright position.
4. Repeat steps two and three as needed.
TIPS:
a) Maximum single punching: 10 sheets of 20 lbs. paper
b) Comfortable single punching: 8-10 sheets of 20 lbs.
paper.
5
2.
3.
1.
COIL INSERTING ( BINDING)
1. Insert coil into first three or four holes. See picture 1
2. Place your punched document onto Coil Inserting Table and finish inserting coil by sliding
hand. See picture 2
3 Use a set of pliers to cut-off any excess coil and bend. Make sure you bend-in both coil ends.
This procedure will avoid document from unbinding itself. See picture 3
See Picture 1.
See Picture 2.
See Picture 3.
Loading...