My Alert Center MyIndependance Quick Manual
MyIndependence
PERS
MYHOME
Quick Guide
Indicators
System Features
Emergency Button
Press and hold to initiate an
emergency call.
Power Green
Green
Red
Red
Orange
Orange
ON
ON
ON (3 Sec)
ON
ON
ON
Communication available
Phone line failure
Active conversation
AC power connected
Message acknowledged
Button pressed
Battery operation
Medical alarm in process
Idle
No power
Blinking
Blinking
OFF
Blinking
Blinking
Active transmission
No phone connection
OFF
Phone Line
Communication
Emergency
Reset
RESET
Power Indicator
Speaker
On/Off Switch
(On bottom panel)
Communication Indicator
Trouble Indicator
Microphone
RESET Button
Cancel an active alarm in progress.
Stops trouble beeper.
Typ e Symbol Color Display Meaning
MyIndependence is a standalone, easy to use, Personal Emergency Response System
(PERS). This quick guide covers the basic features, setup, and operation of the system.
Please call 866 484 4800 or visit myalarmcenter.com/myindependence for a full
online version of the instructions.
MyIndependence
PERS
MYHOME
Quick Guide
E
M
E
R
G
E
N
C
Y
C
A
L
L
Call 866 484 4800 or visit myalarmcenter.com/myindependence
for a full online version of instructions.
MyIndependence
PERS
MYHOME
Quick Guide
Installing the Backup Battery & Power Cable Telephone Connections
System Operations
To expose the back panel of the unit, push
the tab while lifting the cover to reveal the
battery and power connections.
The backup battery’s contacts should be
pointing toward the center of the control panel
and facing down.
Once the telephone cable is connected to a functional telephone
outlet, the Communication Indicator color will switch from red to
green.
Standby Status
• Power Indicator lights in steady green
• Communication Indicator lights in steady green
Emergency
1. Press and hold the EMERGENCY button on the panel or pendant
2. The EMERGENCY will blink red and the Communication Indicator will blink in green
3. An operator will connect with you directly through the panel’s speaker
4. A siren will sound until the Reset button is pressed, a connection is established with
the Monitoring Station, or the siren is timed-out
5. Press the Reset button to stop the siren and cancel the emergency alarm report
Portable button may be worn as a
• Pendant
• Armband
• Wristband
Insert power jack, secure the cable along
the groove, and plug into wall outlet.
Turn the power switch On. All indicator lights should
be in normal functioning mode (see indicator chart).
Pendant Armband Wristband
Test your system. Call 866 484 4800, select option 8,
and an operator will assist you with the testing process.
1 2
3 4
5
Need help?
Call 866 484 4800 or visit myalarmcenter.com/myindependence
for a full online version of instructions.
This document and its contents are subject to change without notice and are the protected intellectual
property of My Alarm Center, LLC. My Alarm Center, LLC will not be held responsible for any damages,
losses, personal injury, etc. that may by incurred for any reason. Please consult the service contract for full
terms and limitations of your agreement with My Alarm Center, LLC.
1. Add the phone line from the jack labeled “PHONE” on the
control panel to the telephone.
2. Unplug the phone line from the existing telephone and plug
it into the jack marked “LINE” on the top of the control panel.
1
2
Loading...