mxr M84 BASS FUZZ DELUXE Directions

92503011755 revA

M84 BASS FUZZ DELUXE

SAMPLE SETTINGS

M84 BASS FUZZ DELUXE

DESCRIPTION

• Based on a rare vintage fuzz
circuit but modied for the
modern bassist

• Tone control affects only the fuzz
signal, leaving your direct signal
clean and clear

• Separate Dry and Fuzz controls
for tonal versatility

• Delivers a bold and cutting
fuzz tone while retaining
clarity and punch

• Analog circuitry for rich
organic tone

POWER

The MXR Bass Fuzz Deluxe can be
powered by one 9 volt battery, a
Dunlop ECB003 9 volt AC adapter
(ECB003E in Europe), or a Dunlop
DCB10 DC Brick power supply.

DIRECTIONS

• Run a cable from your bass to
the Bass Fuzz Deluxe’s Input jack
and run another cable from the
Bass Fuzz Deluxe’s Output jack
to your amplier.

• Set all controls to the 12
o’clock position.

• Turn the effect on by depressing
the footswitch.

• Turn the Dry control clockwise to
increase the amount of the direct
signal or counter-clockwise to
decrease it.

SPECIFICATIONS

Input Impedance 1 MΩ
Output Impedance 100 Ω

Signal to Noise 90 dBV
Fuzz Gain Range 40 dB
Dry Max Gain +6 dB

Bypass True Hardwire

Current Draw 11 mA
Power Supply 9 volts DC

• Turn the Wet control clockwise
to increase the amount of fuzz
signal or counter-clockwise to
decrease it.

• Turn the Tone control clockwise
for a brighter sound; counter­clockwise for a darker sound.

• Turn the Fuzz control clockwise
to increase the amount of fuzz or
counter-clockwise to decrease it.

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]

TOOL BOX

PROG METAL

DESERT SMOKE

STONER HARD ROCK

GRAHAM SLAM

’70S FUNK ROCK

CONTROLS

DRY Controls the direct signal

output level

WET Controls the fuzz signal

output level

TONE Controls the color of the

fuzz signal only

FUZZ Controls the amount

of fuzz

Footswitch toggles effect on/

bypass (White LED indicates on)